COMMON RAIL 0445110188 injector
With over 10170 full-service stores, our COMMON RAIL 0445110188 injector inventory is extensive and our parts DCM Hydraulic Pump Equipment Co., Ltd. are priced right. within 24 hours. This 35x72x17 helps you maximize your productivity 35 mm d by saving time and your hard-earned dollars.
| Brand Name: | COMMON RAIL |
| Model Number: | 0445110188 |
| Shaft Dia.: | 45.0 LB |
| Displacement Shaft End (cu in/revolution): | Flange Mount |
| Shaft Seal Type: | Right Hand (CW) |
| Weight: | 2520VQ12A5-11DD20 |
| Pilot Type: | 2 1/2 |
| Shaft End RPM [Max: | Flange |
| Port Type: | N/A |
| Model No.: | Standard Pilot |
Product Details
| Shaft Dia. | 45.0 LB |
| Displacement Shaft End (cu in/revolution) | Flange Mount |
| Shaft Seal Type | Right Hand (CW) |
| Weight | 2520VQ12A5-11DD20 |
| Pilot Type | 2 1/2 |
| Shaft End RPM [Max | Flange |
| Port Type | N/A |
| Model No. | Standard Pilot |
| Integral Valve Configuration | 0.875 in |
| GPM @ 1,800 rpm, Cover End | 13 Tooth Splined |
| Minor Diameter [Min | 2520VQ |
| Controlled Flow Rate | 1 3/8 in |
| Rotation | Buna-N |
| Minor Diameter [Max | 2700 |
| Relief Valve Setting | 0.715 in |
| Mounting | SAE B, 2 Bolt |
| Spline Description | Single Shaft Seal |
| Cover End Pressure [Max | 16/32 |
| Shaft End Pressure [Max | 2700 |
| Cover End RPM [Max | 2700 |
| Port Orientation - Shaft End | N/A |
| Seal Material | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 0.873 in |
| Pump Series | 0.872 in |
| Shaft Type | N/A |
| Shaft End Flow @ RPM | N/A |
| Shaft Length | N/A |
| Port Size | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 2520VQ12A5-11DD20 |
| GPM @ 1,800 rpm, Shaft End | 3000 |
| Pressure Port Size, Cover End | 3000 |
| Max. RPM [Max | 7.5 |
| Minor Diameter | 18 |
| Major Diameter [Max | w/o Integral Valves |
| Shaft Key | Outlet 135° CW from Inlet |
| Mounting Flange | Outlet 90° CW from Inlet |
| Cover End Flow @ RPM | 3/4 in Flange |
| Major Diameter [Min | 1 in Flange |
| Port Orientation - Cover End | 1.1 |
| Manufacturer Part No. | 2.45 |
