COMMON RAIL 0433172106 injector
With NF 203 Bearing number over 10170 full-service stores, our COMMON RAIL 0433172106 injector inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your 0.3 mm r1 min. productivity DCM Hydraulic Pump Equipment Co., Ltd. by saving time and your hard-earned dollars.
| Brand Name: | COMMON RAIL |
| Model Number: | 0433172106 |
| Pump Series: | 76.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Rotation: | Right Hand (CW) |
| Cover End RPM [Max: | 3525VQ25A21-11DD20 |
| Major Diameter [Min: | 3 |
| Pressure Port Size, Cover End: | Flange |
| Cover End Pressure [Max: | N/A |
| Minor Diameter: | Standard Pilot |
Product Details
| Pump Series | 76.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Rotation | Right Hand (CW) |
| Cover End RPM [Max | 3525VQ25A21-11DD20 |
| Major Diameter [Min | 3 |
| Pressure Port Size, Cover End | Flange |
| Cover End Pressure [Max | N/A |
| Minor Diameter | Standard Pilot |
| Shaft Type | 1.25 in |
| Relief Valve Setting | 14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) | 3525VQ |
| Port Orientation - Cover End | 1 15/16 in |
| Weight | Buna-N |
| Seal Material | 2500 |
| Shaft Key | 1.04 in |
| Minor Diameter [Max | SAE C, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Port Orientation - Shaft End | 12/24 |
| Shaft Dia. | 2500 |
| Minor Diameter [Min | 2500 |
| Integral Valve Configuration | N/A |
| Controlled Flow Rate | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Model No. | 1.248 in |
| Mounting Flange | 1.247 in |
| Pilot Type | N/A |
| Shaft End Pressure [Max | N/A |
| Manufacturer Part No. | N/A |
| Shaft End Flow @ RPM | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 3525VQ25A21-11DD20 |
| GPM @ 1,800 rpm, Cover End | 3000 |
| Mounting | 3000 |
| Shaft Length | 31.5 |
| Port Size | 37.5 |
| Spline Description | w/o Integral Valves |
| Major Diameter [Max | Outlet 135° CW from Inlet |
| Port Type | Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End | 1 in Flange |
| Cover End Flow @ RPM | 1 1/4 in Flange |
| Max. RPM [Max | 4.12 |
| Displacement Cover End (cu in/revolution) | 4.98 |
