COMMON RAIL 0433172062 injector
With over 10170 full-service stores, 1,168,933 Static Load Rating (Cor) our COMMON RAIL 0433172062 injector inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize DCM Hydraulic Pump Equipment Co., Ltd. your productivity by saving time and your hard-earned dollars.
| Brand Name: | COMMON RAIL |
| Model Number: | 0433172062 |
| Max. RPM [Max: | 30.0 LB |
| Port Size: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Pump Series: | V2010-1F7S7S-11DC12 |
| GPM @ 1,800 rpm, Shaft End: | 1 1/2 |
| Shaft Key: | Flange |
| Shaft Length: | N/A |
| Minor Diameter: | N/A |
Product Details
| Max. RPM [Max | 30.0 LB |
| Port Size | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Pump Series | V2010-1F7S7S-11DC12 |
| GPM @ 1,800 rpm, Shaft End | 1 1/2 |
| Shaft Key | Flange |
| Shaft Length | N/A |
| Minor Diameter | N/A |
| Cover End Flow @ RPM | 0.875 in |
| Spline Description | 13 Tooth Splined |
| Integral Valve Configuration | V2010 |
| Mounting | 1 5/16 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Cover End Pressure [Max | 3000 |
| Major Diameter [Max | 0.728 in |
| Major Diameter [Min | SAE B, 2 Bolt |
| Shaft Dia. | Single Shaft Seal |
| Relief Valve Setting | 16/32 |
| Shaft Type | 2800 |
| Shaft End Pressure [Max | 3000 |
| Rotation | N/A |
| Shaft Seal Type | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Weight | 0.873 in |
| Displacement Shaft End (cu in/revolution) | 0.872 in |
| Pressure Port Size, Shaft End | 0.7335 in |
| Shaft End RPM [Max | 0.7225 in |
| Pressure Port Size, Cover End | N/A |
| Controlled Flow Rate | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Pilot Type | V2010-1F7S7S-11DC12 |
| Model No. | 2000 |
| Port Orientation - Shaft End | 2500 |
| Cover End RPM [Max | 10.5 |
| Minor Diameter [Max | 10.5 |
| Shaft End Flow @ RPM | N/A |
| Mounting Flange | Outlet 45° CW from Inlet |
| Port Type | Outlet 90° CW from Inlet |
| Manufacturer Part No. | 1/2 in SAE O-Ring |
| Minor Diameter [Min | 3/4 in SAE O-Ring |
| Seal Material | 1.39 |
| Port Orientation - Cover End | 1.39 |
