HR5 Hydraulic Pilot Pump for Excavator EX** Gear Charge pump
| Pilot Type: |
45.0 LB |
| Port Size: |
Flange Mount |
| Mounting: |
Left Hand (CCW) |
| Rotation: |
2520VQ21A14-11DC20L |
| Cover End RPM [Max: |
2 1/2 |
| Cover End Flow @ RPM: |
Flange |
| Minor Diameter [Min: |
N/A |
| Cover End Pressure [Max: |
Standard Pilot |
| PDF |
|
Product Details
| Pilot Type |
45.0 LB |
| Port Size |
Flange Mount |
| Mounting |
Left Hand (CCW) |
| Rotation |
2520VQ21A14-11DC20L |
| Cover End RPM [Max |
2 1/2 |
| Cover End Flow @ RPM |
Flange |
| Minor Diameter [Min |
N/A |
| Cover End Pressure [Max |
Standard Pilot |
| Minor Diameter [Max |
0.875 in |
| Shaft End RPM [Max |
13 Tooth Splined |
| Displacement Shaft End (cu in/revolution) |
2520VQ |
| Minor Diameter |
1 3/8 in |
| Pump Series |
Buna-N |
| Shaft Type |
2500 |
| Shaft Seal Type |
0.715 in |
| GPM @ 1,800 rpm, Shaft End |
SAE B, 2 Bolt |
| Weight |
Single Shaft Seal |
| Pressure Port Size, Cover End |
16/32 |
| Pressure Port Size, Shaft End |
2700 |
| Port Orientation - Shaft End |
2500 |
| Integral Valve Configuration |
N/A |
| Shaft Key |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Port Type |
0.873 in |
| Major Diameter [Max |
0.872 in |
| Shaft End Flow @ RPM |
N/A |
| Seal Material |
N/A |
| Mounting Flange |
N/A |
| Controlled Flow Rate |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
2520VQ21A14-11DC20L |
| Shaft Length |
2000 |
| Major Diameter [Min |
3000 |
| GPM @ 1,800 rpm, Cover End |
21 |
| Max. RPM [Max |
31.5 |
| Model No. |
w/o Integral Valves |
| Displacement Cover End (cu in/revolution) |
Outlet 45° CW from Inlet |
| Manufacturer Part No. |
Outlet 90° CW from Inlet |
| Relief Valve Setting |
3/4 in Flange |
| Spline Description |
1 in Flange |
| Shaft Dia. |
2.8 |
| Shaft End Pressure [Max |
4.12 |