Hydstar Selling CAT Hydraulic Piston Motor 161-8919 For Caterpillar 825G 3046E
| Shaft Seal Type: |
45.0 LB |
| Mounting Flange: |
Flange Mount |
| Seal Material: |
Right Hand (CW) |
| Major Diameter [Max: |
2520VQ17A5-1DC20 |
| Shaft Type: |
2 1/2 |
| Relief Valve Setting: |
Flange |
| Pilot Type: |
3/16 in |
| Displacement Cover End (cu in/revolution): |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Seal Type |
45.0 LB |
| Mounting Flange |
Flange Mount |
| Seal Material |
Right Hand (CW) |
| Major Diameter [Max |
2520VQ17A5-1DC20 |
| Shaft Type |
2 1/2 |
| Relief Valve Setting |
Flange |
| Pilot Type |
3/16 in |
| Displacement Cover End (cu in/revolution) |
Standard Pilot |
| GPM @ 1,800 rpm, Cover End |
0.875 in |
| Shaft End Flow @ RPM |
Straight w/ Key |
| Port Orientation - Cover End |
2520VQ |
| Shaft End RPM [Max |
1.9375 in |
| Manufacturer Part No. |
Buna-N |
| Shaft Dia. |
2500 |
| Shaft End Pressure [Max |
N/A |
| Spline Description |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Cover End RPM [Max |
N/A |
| Major Diameter [Min |
2700 |
| Pressure Port Size, Shaft End |
2500 |
| Weight |
N/A |
| Cover End Flow @ RPM |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter |
N/A |
| Shaft Length |
N/A |
| Controlled Flow Rate |
N/A |
| Pump Series |
N/A |
| Model No. |
N/A |
| Port Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Max. RPM [Max |
2520VQ17A5-1DC20 |
| Pressure Port Size, Cover End |
3000 |
| Integral Valve Configuration |
3000 |
| Minor Diameter [Min |
7.5 |
| Mounting |
25.5 |
| Displacement Shaft End (cu in/revolution) |
w/o Integral Valves |
| Shaft Key |
Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
Outlet 90° CW from Inlet |
| Port Orientation - Shaft End |
3/4 in Flange |
| Rotation |
1 in Flange |
| Cover End Pressure [Max |
1.1 |
| Minor Diameter [Max |
3.37 |