pc45-8 pc30 Hydraulic Pump Repair Kits used Excavator Swing Motor
| Relief Valve Setting: |
26.0 LB |
| GPM @ 1,800 rpm, Shaft End: |
Flange Mount |
| Weight: |
Right Hand (CW) |
| Shaft Type: |
8 gal/min @ 1200 rpm |
| Controlled Flow Rate: |
20V8A-151C22R |
| Shaft Key: |
1.5 |
| Mounting: |
Flange |
| Port Type: |
N/A |
| PDF |
|
Product Details
| Relief Valve Setting |
26.0 LB |
| GPM @ 1,800 rpm, Shaft End |
Flange Mount |
| Weight |
Right Hand (CW) |
| Shaft Type |
8 gal/min @ 1200 rpm |
| Controlled Flow Rate |
20V8A-151C22R |
| Shaft Key |
1.5 |
| Mounting |
Flange |
| Port Type |
N/A |
| Major Diameter [Max |
22 |
| Rotation |
8 gpm @ 1200 rpm |
| Shaft Dia. |
151 |
| Shaft End Flow @ RPM |
0.875 in |
| Pressure Port Size, Shaft End |
13 Tooth Splined |
| Minor Diameter [Max |
12 / 1750 |
| Port Orientation - Cover End |
20V |
| GPM @ 1,800 rpm, Cover End |
1.25 in |
| Cover End Flow @ RPM |
Single |
| Pressure Port Size, Cover End |
None |
| Shaft Seal Type |
3/4 in Code 61 Flange |
| Model No. |
Buna-N |
| Manufacturer Part No. |
1800 |
| Pump Series |
3000 psi |
| Max. RPM [Max |
12 |
| Port Orientation - Shaft End |
SAE B, 2 Bolt |
| Minor Diameter |
Single Shaft Seal |
| Integral Valve Configuration |
Inline w/ Inlet |
| Shaft End RPM [Max |
20V8A-151C22R |
| Port Size |
1.7 |
| Pilot Type |
w/o Integral Valves |