CUMMINS 0445110660 injector
QuestionCUMMINS 0445110660 injector ? Find what B04264 Product Group you need faster DCM Hydraulic Pump Equipment Co., Ltd. Plain Bearings Category by entering your CUMMINS injector information 0.267 Weight .
| Brand Name: | CUMMINS |
| Model Number: | 0445110660 |
| Shaft End Pressure [Max: | 45.0 LB |
| Pump Series: | Flange Mount |
| Port Orientation - Cover End: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End: | 2520VQ21A14-11BC20-LH |
| Mounting Flange: | 2.5 |
| Seal Material: | Flange |
| Spline Description: | N/A |
| GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
Product Details
| Shaft End Pressure [Max | 45.0 LB |
| Pump Series | Flange Mount |
| Port Orientation - Cover End | Left Hand (CCW) |
| GPM @ 1,800 rpm, Cover End | 2520VQ21A14-11BC20-LH |
| Mounting Flange | 2.5 |
| Seal Material | Flange |
| Spline Description | N/A |
| GPM @ 1,800 rpm, Shaft End | Standard Pilot |
| Major Diameter [Max | 0.875 in |
| Mounting | 13 Tooth Splined |
| Shaft Dia. | 2520VQ |
| Shaft Length | 1.375 in |
| Integral Valve Configuration | Double |
| Shaft Seal Type | Buna-N |
| Cover End Flow @ RPM | 2500 |
| Max. RPM [Max | 0.715 in |
| Minor Diameter [Max | SAE B, 2 Bolt |
| Shaft End Flow @ RPM | Single Shaft Seal |
| Shaft Key | 16/32 |
| Port Size | 2700 |
| Port Type | 2500 |
| Pilot Type | N/A |
| Shaft Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 0.873 in |
| Minor Diameter [Min | 0.872 in |
| Model No. | N/A |
| Relief Valve Setting | N/A |
| Manufacturer Part No. | N/A |
| Rotation | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 2520VQ21A14-11BC20-LH |
| Pressure Port Size, Shaft End | 2000 |
| Pressure Port Size, Cover End | 3000 |
| Weight | 21 |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Cover End Pressure [Max | w/o Integral Valves |
| Controlled Flow Rate | Outlet 45° CW from Inlet |
| Minor Diameter | Outlet 90° CCW from Inlet |
| Cover End RPM [Max | 3/4 in Flange |
| Shaft End RPM [Max | 1 in Flange |
| Major Diameter [Min | 2.8 |