Cross reference Rexroth PVV4-1X/082RJ15UMC Vane pump | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | M | a | B | H | D | C | W | L |
| 06NUP0820NRC3 | KOYO | - | - | - | - | 75 mm | 20 mm | - | - |
| KB0825 | NBS | - | - | - | - | 16 mm | 0,27 kN | 1,1 mm | 25 mm |
| KB0825-PP | NBS | - | - | - | - | 16 mm | 0,27 kN | 1,1 mm | 25 mm |
| KB0825AJ | Loyal | - | - | 25 mm | - | 16 mm | 0,365 kN | 1 mm | - |
| KB0825UU | Loyal | - | - | 25 mm | - | 16 mm | 0,365 kN | 1 mm | - |
| ZKLR0828-2Z | INA | 35 mm | - | 14 mm | 15,5 mm | 23,9 mm | - | - | - |
| VKHB 2082 | SKF | - | - | - | - | 145,000 | - | - | - |
| 08118/08231 | KOYO | - | 13,5 mm | 15,08 mm | - | - | 29,5 kN | - | - |
| 08118/08231D+X1S-08118 | Timken | - | - | - | - | 58,738 mm | 24,608 mm | - | - |
| 08118/08237 | Timken | - | - | 15,08 mm | - | 58,788 mm | 10,716 mm | - | - |
| 08125/08231 | Loyal | - | 1,3 mm | 15,08 mm | - | 58,738 mm | 29,3 kN | - | - |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | Relief Valve Setting:45.0 LB; Manufacturer Part No.:Flange Mount; Model No.:Left Hand (CCW); Integral Valve Configuration:2520VQ21A11-11BC20-LH; Pressure Port Size, Cover End:2.5; GPM @ 1,800 rpm, Cover End:Flange; Shaft End Pressure [Max:N/A; Shaft Length:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Cover End Flow @ RPM:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Weight:2520VQ21A11-11BC20-LH; Pilot Type:2.5; Port Orientation - Shaft End:Flange; Pressure Port Size, Shaft End:N/A; Major Diameter [Max:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Minor Diameter:45.0 LB; Shaft Length:Flange Mount; Shaft Seal Type:Left Hand (CCW); Cover End Pressure [Max:2520VQ21A11-11BC20-LH; Shaft End Pressure [Max:2.5; Port Type:Flange; Shaft Dia.:N/A; Pressure Port Size, Cover End:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Seal Material:45.0 LB; Integral Valve Configuration:Flange Mount; Spline Description:Left Hand (CCW); Controlled Flow Rate:2520VQ21A11-11BC20-LH; Weight:2.5; Shaft Key:Flange; Major Diameter [Max:N/A; Max. RPM [Max:Standard Pilot; Shaft Seal Type:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901085392 PVV51-1X/139-027RB15DDMC Vane pump | Port Orientation - Shaft End:45.0 LB; Shaft Dia.:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Port Type:2520VQ21A11-11BC20-LH; Controlled Flow Rate:2.5; Major Diameter [Min:Flange; Shaft End Flow @ RPM:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Seal Material:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Shaft End RPM [Max:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Displacement Cover End (cu in/revolution):2520VQ21A11-11BC20-LH; Major Diameter [Min:2.5; Major Diameter [Max:Flange; Shaft Type:N/A; Spline Description:Standard Pilot; Model No.:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901085395 PVV51-1X/154-046RB15DDMC Vane pump | Manufacturer Part No.:45.0 LB; Minor Diameter [Min:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Controlled Flow Rate:2520VQ21A11-11BC20-LH; Major Diameter [Min:2.5; Mounting Flange:Flange; Model No.:N/A; Spline Description:Standard Pilot; Shaft End RPM [Max:0.875 in; Rotation:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Pilot Type:45.0 LB; Cover End Flow @ RPM:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Port Orientation - Shaft End:2520VQ21A11-11BC20-LH; Shaft Key:2.5; Mounting Flange:Flange; Shaft Dia.:N/A; Cover End RPM [Max:Standard Pilot; Minor Diameter [Max:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Shaft Type:45.0 LB; Shaft Seal Type:Flange Mount; Relief Valve Setting:Left Hand (CCW); Controlled Flow Rate:2520VQ21A11-11BC20-LH; Rotation:2.5; Displacement Cover End (cu in/revolution):Flange; Port Size:N/A; Minor Diameter [Max:Standard Pilot; Port Orientation - Shaft End:0.875 in; Seal Material:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Shaft End Pressure [Max:45.0 LB; Mounting:Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Integral Valve Configuration:2520VQ21A11-11BC20-LH; Shaft Dia.:2.5; Seal Material:Flange; Controlled Flow Rate:N/A; Cover End Pressure [Max:Standard Pilot; Relief Valve Setting:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11BC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1; |
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Rexroth PVV4-1X/082RJ15UMC Vane pump Video