ANSON IVPQ1 IVPQ2 IVPQ3 IVPQ4 Low Noise Hydraulic Vane Pump With Low Pressure
| Controlled Flow Rate: | 18.0 LB |
| Pressure Port Size, Shaft End: | Flange Mount |
| Pump Series: | Right Hand (CW) |
| Shaft End RPM [Max: | SAE-20 |
| Minor Diameter [Max: | SAE |
| Cover End RPM [Max: | 3/16 in |
| Manufacturer Part No.: | 12 |
| Port Type: | 11 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Controlled Flow Rate | 18.0 LB |
| Pressure Port Size, Shaft End | Flange Mount |
| Pump Series | Right Hand (CW) |
| Shaft End RPM [Max | SAE-20 |
| Minor Diameter [Max | SAE |
| Cover End RPM [Max | 3/16 in |
| Manufacturer Part No. | 12 |
| Port Type | 11 gpm @ 1200 rpm |
| Max. RPM [Max | 0.75 in |
| Rotation | Straight w/ Key |
| Relief Valve Setting | 16.5 gpm @ 1800 rpm |
| Port Orientation - Cover End | V20 |
| Shaft Key | 2.66 in |
| GPM @ 1,800 rpm, Shaft End | SAE-8 |
| Shaft End Flow @ RPM | Buna-N |
| Cover End Flow @ RPM | 2500 |
| Major Diameter [Min | 2500 psi |
| Major Diameter [Max | 16 1/2 |
| Shaft End Pressure [Max | S |
| Cover End Pressure [Max | SAE A, 2 Bolt |
| Displacement Cover End (cu in/revolution) | T |
| Pressure Port Size, Cover End | 1 |
| Seal Material | 90° CCW from Inlet |
| Integral Valve Configuration | 2.22 |
| Minor Diameter [Min | 6 gal/min |
| GPM @ 1,800 rpm, Cover End | Priority Valve & Relief |
| Port Size | 2000 psi |
| Shaft Length | 1B |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump