Hydraulic Vane Pump Kits Cartridge Denison Core T6C
| Pressure Port Size, Cover End: | 32.0 LB |
| Shaft Key: | Flange Mount |
| GPM @ 1,800 rpm, Cover End: | Left Hand (CCW) |
| Model No.: | 21 gal/min @ 1200 rpm |
| Port Type: | 25VQ21A-1C20-LH |
| Spline Description: | 1.5 |
| Pump Series: | Flange |
| Seal Material: | 3/16 in |
| PDF |
|
Product Details
| Pressure Port Size, Cover End | 32.0 LB |
| Shaft Key | Flange Mount |
| GPM @ 1,800 rpm, Cover End | Left Hand (CCW) |
| Model No. | 21 gal/min @ 1200 rpm |
| Port Type | 25VQ21A-1C20-LH |
| Spline Description | 1.5 |
| Pump Series | Flange |
| Seal Material | 3/16 in |
| Major Diameter [Min | 20 |
| Rotation | 21 gpm @ 1200 rpm |
| Pilot Type | 1 |
| Shaft End Flow @ RPM | 0.875 in |
| Cover End RPM [Max | Straight w/ Key |
| Manufacturer Part No. | 31.5 gpm @ 1800 rpm |
| Cover End Flow @ RPM | 25VQ |
| Relief Valve Setting | 2.31 in |
| Shaft Length | Single |
| GPM @ 1,800 rpm, Shaft End | None |
| Weight | 1 in Flange |
| Port Size | Buna-N |
| Shaft End Pressure [Max | 2500 |
| Displacement Cover End (cu in/revolution) | 3000 psi |
| Displacement Shaft End (cu in/revolution) | 31 1/2 |
| Shaft Type | A |
| Shaft End RPM [Max | SAE B, 2 Bolt |
| Integral Valve Configuration | Single Shaft Seal |
| Controlled Flow Rate | Inline w/ Inlet |
| Shaft Dia. | 25VQ21A-1C20-LH |
| Max. RPM [Max | 4.1 |
| Minor Diameter [Max | w/o Integral Valves |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump