25VMQ-016 25VMQ016 25VMQ16 25VMQ-16 25VMQ Vane Pump Cartridge Replacement
| Integral Valve Configuration: | 15.0 LB |
| Model No.: | Flange Mount |
| Shaft Type: | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End: | 1 |
| Spline Description: | NPT |
| Seal Material: | N/A |
| Rotation: | 20 |
| Shaft Length: | 4 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Integral Valve Configuration | 15.0 LB |
| Model No. | Flange Mount |
| Shaft Type | Left Hand (CCW) |
| GPM @ 1,800 rpm, Shaft End | 1 |
| Spline Description | NPT |
| Seal Material | N/A |
| Rotation | 20 |
| Shaft Length | 4 gpm @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End | 0.875 in |
| Displacement Cover End (cu in/revolution) | 13 Tooth Splined |
| Controlled Flow Rate | 6 gpm @ 1800 rpm |
| Major Diameter [Min | V10 |
| Shaft End Pressure [Max | 1 5/8 in |
| Minor Diameter [Max | 1/2 in NPT |
| Pump Series | Buna-N |
| Cover End RPM [Max | 3400 |
| Max. RPM [Max | 2500 psi |
| Cover End Flow @ RPM | 6 |
| Pressure Port Size, Shaft End | P |
| Pressure Port Size, Cover End | SAE A, 2 Bolt |
| Shaft End RPM [Max | P |
| Port Orientation - Cover End | 1 |
| Minor Diameter [Min | Inline w/Inlet |
| Shaft End Flow @ RPM | 0.8 |
| Shaft Dia. | w/o Integral Valves |
| Weight | 12C |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump