Fuel Oil Transfer Pump 1W1700 Or3008 for D8N Engine 3400
| Shaft End Flow @ RPM: | 15.0 LB |
| Minor Diameter [Min: | Flange Mount |
| Weight: | Right Hand (CW) |
| Manufacturer Part No.: | SAE-16 |
| Model No.: | SAE |
| Shaft Length: | N/A |
| Mounting: | 20 |
| GPM @ 1,800 rpm, Shaft End: | 6 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Shaft End Flow @ RPM | 15.0 LB |
| Minor Diameter [Min | Flange Mount |
| Weight | Right Hand (CW) |
| Manufacturer Part No. | SAE-16 |
| Model No. | SAE |
| Shaft Length | N/A |
| Mounting | 20 |
| GPM @ 1,800 rpm, Shaft End | 6 gpm @ 1200 rpm |
| Max. RPM [Max | 0.73 in |
| Shaft End Pressure [Max | 11 Tooth Splined |
| Minor Diameter | 9 gpm @ 1750 rpm |
| GPM @ 1,800 rpm, Cover End | V10 |
| Displacement Cover End (cu in/revolution) | 1 1/4 in |
| Port Orientation - Cover End | SAE-8 |
| Minor Diameter [Max | Buna-N |
| Shaft Seal Type | 3000 |
| Mounting Flange | 2200 psi |
| Cover End Pressure [Max | 9 |
| Port Size | S |
| Pilot Type | SAE A, 2 Bolt |
| Seal Material | T |
| Rotation | 1 |
| Pressure Port Size, Cover End | Inline w/Inlet |
| Controlled Flow Rate | 1.19 |
| Integral Valve Configuration | 4 gal/min |
| Major Diameter [Max | Flow Control & Relief |
| Port Orientation - Shaft End | 2000 psi |
| Major Diameter [Min | 38C |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump