| Relief Valve Setting | 45.0 LB |
| Pressure Port Size, Shaft End | Flange Mount |
| Seal Material | Left Hand (CCW) |
| Max. RPM [Max | 2520V21A14-11DD22L |
| Pump Series | 2 1/2 |
| Displacement Shaft End (cu in/revolution) | Flange |
| Port Type | N/A |
| Model No. | Standard Pilot |
| Shaft End Pressure [Max | 1.09 in |
| Shaft Seal Type | 13 Tooth Splined |
| Minor Diameter [Min | 2520V |
| Major Diameter [Max | 1.75 in |
| GPM @ 1,800 rpm, Cover End | Buna-N |
| Shaft Length | 1800 |
| Shaft Type | 0.7285 in |
| Rotation | SAE B, 2 Bolt |
| Minor Diameter [Max | Single Shaft Seal |
| Major Diameter [Min | 16/32 |
| Cover End Flow @ RPM | 1800 |
| Cover End RPM [Max | 1800 |
| Shaft Key | N/A |
| Pilot Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 0.873 in |
| Port Orientation - Cover End | 0.872 in |
| Integral Valve Configuration | 0.734 in |
| Cover End Pressure [Max | 0.723 in |
| Mounting | N/A |
| Shaft Dia. | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight | 2520V21A14-11DD22L |
| GPM @ 1,800 rpm, Shaft End | 3000 |
| Mounting Flange | 2500 |
| Controlled Flow Rate | 21 |
| Port Orientation - Shaft End | 31.5 |
| Displacement Cover End (cu in/revolution) | N/A |
| Minor Diameter | Outlet 135° CW from Inlet |
| Port Size | Outlet 90° CW from Inlet |
| Spline Description | 3/4 in Code 61 |
| Pressure Port Size, Cover End | 1 in Code 61 |
| Shaft End RPM [Max | 2.8 |
| Manufacturer Part No. | 4.1 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump