Wheel Loader WA450 Compactor WF450-3 Hydraulic Gear Pump 705-36-29540
Integral Valve Configuration: | 45.0 LB |
GPM @ 1,800 rpm, Cover End: | Flange Mount |
Cover End Pressure [Max: | Left Hand (CCW) |
Displacement Shaft End (cu in/revolution): | 2520VQ12C11-11DC20L |
Shaft End Flow @ RPM: | 2 1/2 |
Minor Diameter: | Flange |
Pump Series: | N/A |
Major Diameter [Max: | Standard Pilot |
PDF |
|
Product Details
Integral Valve Configuration | 45.0 LB |
GPM @ 1,800 rpm, Cover End | Flange Mount |
Cover End Pressure [Max | Left Hand (CCW) |
Displacement Shaft End (cu in/revolution) | 2520VQ12C11-11DC20L |
Shaft End Flow @ RPM | 2 1/2 |
Minor Diameter | Flange |
Pump Series | N/A |
Major Diameter [Max | Standard Pilot |
Mounting Flange | 0.875 in |
Shaft Type | 13 Tooth Splined |
Displacement Cover End (cu in/revolution) | 2520VQ |
Pressure Port Size, Cover End | 1 3/8 in |
Port Orientation - Shaft End | Buna-N |
Mounting | 2700 |
Minor Diameter [Min | 0.715 in |
Model No. | SAE B, 2 Bolt |
Pilot Type | Single Shaft Seal |
Port Orientation - Cover End | 16/32 |
Shaft Key | 2700 |
Minor Diameter [Max | 2700 |
Shaft Dia. | N/A |
Cover End RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Max. RPM [Max | 0.873 in |
Controlled Flow Rate | 0.872 in |
Seal Material | N/A |
Shaft Length | N/A |
Manufacturer Part No. | N/A |
GPM @ 1,800 rpm, Shaft End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Rotation | 2520VQ12C11-11DC20L |
Shaft End RPM [Max | 3000 |
Major Diameter [Min | 3000 |
Shaft Seal Type | 16.5 |
Relief Valve Setting | 18 |
Spline Description | w/o Integral Valves |
Pressure Port Size, Shaft End | Outlet 45° CW from Inlet |
Cover End Flow @ RPM | Outlet 90° CW from Inlet |
Port Type | 1 1/16 in SAE O-Ring |
Shaft End Pressure [Max | 1 5/16 in SAE O-Ring |
Port Size | 2.22 |
Weight | 2.45 |