Dump Truck and Paver Use Gear Fuel Hand Priming Pump 1375541 137-5541
GPM @ 1,800 rpm, Shaft End: | 101.0 LB |
Displacement Shaft End (cu in/revolution): | Flange Mount |
Relief Valve Setting: | Left Hand (CCW) |
Cover End Pressure [Max: | 4525VQ60A14-11AA20-LH |
Port Orientation - Cover End: | 3 1/2 |
Mounting Flange: | Flange |
Cover End RPM [Max: | N/A |
Pilot Type: | Standard Pilot |
PDF |
|
Product Details
GPM @ 1,800 rpm, Shaft End | 101.0 LB |
Displacement Shaft End (cu in/revolution) | Flange Mount |
Relief Valve Setting | Left Hand (CCW) |
Cover End Pressure [Max | 4525VQ60A14-11AA20-LH |
Port Orientation - Cover End | 3 1/2 |
Mounting Flange | Flange |
Cover End RPM [Max | N/A |
Pilot Type | Standard Pilot |
Pump Series | 1.25 in |
Pressure Port Size, Cover End | 14 Tooth Splined |
Weight | 4525VQ |
Port Orientation - Shaft End | 1 15/16 in |
Major Diameter [Min | Buna-N |
Port Size | 2200 |
Shaft Dia. | 1.04 in |
Shaft Length | SAE C, 2 Bolt |
GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
Spline Description | 12/24 |
Rotation | 2200 |
Shaft Seal Type | 2200 |
Minor Diameter | N/A |
Major Diameter [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Shaft Key | 1.248 in |
Shaft End Pressure [Max | 1.247 in |
Minor Diameter [Min | N/A |
Cover End Flow @ RPM | N/A |
Integral Valve Configuration | N/A |
Mounting | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
Seal Material | 4525VQ60A14-11AA20-LH |
Port Type | 3000 |
Displacement Cover End (cu in/revolution) | 2500 |
Model No. | 21 |
Controlled Flow Rate | 90 |
Shaft End Flow @ RPM | w/o Integral Valves |
Minor Diameter [Max | Outlet 135° CCW from Inlet |
Shaft End RPM [Max | Outlet Opposite Inlet |
Manufacturer Part No. | 1 in Flange |
Max. RPM [Max | 1 1/2 in Flange |
Pressure Port Size, Shaft End | 2.77 |
Shaft Type | 11.8 |