Swing Motor 334-9968 3349968 for CAT Excavator 320C
Cover End Pressure [Max: | 30.0 LB |
Shaft Key: | Flange Mount |
Controlled Flow Rate: | Right Hand (CW) |
Integral Valve Configuration: | V2010-1F12S5S-1CC12 |
Pump Series: | 1 1/2 |
Minor Diameter: | Flange |
Port Type: | 3/16 in |
Cover End Flow @ RPM: | N/A |
PDF |
|
Product Details
Cover End Pressure [Max | 30.0 LB |
Shaft Key | Flange Mount |
Controlled Flow Rate | Right Hand (CW) |
Integral Valve Configuration | V2010-1F12S5S-1CC12 |
Pump Series | 1 1/2 |
Minor Diameter | Flange |
Port Type | 3/16 in |
Cover End Flow @ RPM | N/A |
Shaft End Pressure [Max | 0.875 in |
Manufacturer Part No. | Straight w/ Key |
Shaft End RPM [Max | V2010 |
Shaft Dia. | 2 5/16 in |
GPM @ 1,800 rpm, Shaft End | Buna-N |
Model No. | 2400 |
Port Orientation - Shaft End | N/A |
Max. RPM [Max | SAE B, 2 Bolt |
Pressure Port Size, Cover End | Single Shaft Seal |
Minor Diameter [Min | N/A |
Displacement Shaft End (cu in/revolution) | 3000 |
Spline Description | 2400 |
Shaft End Flow @ RPM | N/A |
Shaft Seal Type | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Relief Valve Setting | N/A |
Rotation | N/A |
Port Size | N/A |
Weight | N/A |
Shaft Type | N/A |
Shaft Length | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End | V2010-1F12S5S-1CC12 |
Pressure Port Size, Shaft End | 2500 |
Mounting Flange | 2200 |
Displacement Cover End (cu in/revolution) | 7.5 |
Major Diameter [Max | 18 |
Major Diameter [Min | N/A |
Cover End RPM [Max | Outlet 45° CW from Inlet |
Minor Diameter [Max | Outlet Inline w/Inlet |
Seal Material | 1/2 in SAE O-Ring |
Port Orientation - Cover End | 3/4 in SAE O-Ring |
Mounting | 1 |
Pilot Type | 2.38 |