PC60-7 Hydraulic Excavator 4D95 Engine Lubricating Oil Pump 6204-53-1100
GPM @ 1,800 rpm, Shaft End: | 45.0 LB |
Shaft End Flow @ RPM: | Flange Mount |
Major Diameter [Max: | Left Hand (CCW) |
Minor Diameter: | 2520VQ21A8-1DD20-LH |
Shaft Type: | 2 1/2 |
Weight: | Flange |
GPM @ 1,800 rpm, Cover End: | 3/16 in |
Minor Diameter [Min: | Standard Pilot |
PDF |
|
Product Details
GPM @ 1,800 rpm, Shaft End | 45.0 LB |
Shaft End Flow @ RPM | Flange Mount |
Major Diameter [Max | Left Hand (CCW) |
Minor Diameter | 2520VQ21A8-1DD20-LH |
Shaft Type | 2 1/2 |
Weight | Flange |
GPM @ 1,800 rpm, Cover End | 3/16 in |
Minor Diameter [Min | Standard Pilot |
Max. RPM [Max | 0.875 in |
Rotation | Straight w/ Key |
Cover End Pressure [Max | 2520VQ |
Model No. | 1 15/16 in |
Port Orientation - Cover End | Buna-N |
Manufacturer Part No. | 2500 |
Port Type | N/A |
Pressure Port Size, Cover End | SAE B, 2 Bolt |
Seal Material | Single Shaft Seal |
Shaft End RPM [Max | N/A |
Relief Valve Setting | 2700 |
Displacement Shaft End (cu in/revolution) | 2500 |
Minor Diameter [Max | N/A |
Pump Series | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Pressure Port Size, Shaft End | N/A |
Pilot Type | N/A |
Shaft Dia. | N/A |
Port Size | N/A |
Displacement Cover End (cu in/revolution) | N/A |
Mounting | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Controlled Flow Rate | 2520VQ21A8-1DD20-LH |
Integral Valve Configuration | 3000 |
Cover End Flow @ RPM | 3000 |
Shaft Seal Type | 12 |
Port Orientation - Shaft End | 31.5 |
Shaft End Pressure [Max | w/o Integral Valves |
Shaft Length | Outlet 135° CW from Inlet |
Cover End RPM [Max | Outlet 90° CW from Inlet |
Major Diameter [Min | 3/4 in Flange |
Mounting Flange | 1 in Flange |
Shaft Key | 1.67 |
Spline Description | 4.12 |