3N2078 New Aftermarket Cat Excavator Fuel Pump
| Spline Description: | 75.0 LB |
| Cover End RPM [Max: | Flange Mount |
| Major Diameter [Max: | Right Hand (CW) |
| Shaft End Flow @ RPM: | 50 gal/min @ 1200 rpm |
| Relief Valve Setting: | 45V50A-86A22R |
| Shaft Type: | 3 |
| Minor Diameter [Max: | Flange |
| Weight: | 3/8 in |
| PDF |
|
Product Details
| Spline Description | 75.0 LB |
| Cover End RPM [Max | Flange Mount |
| Major Diameter [Max | Right Hand (CW) |
| Shaft End Flow @ RPM | 50 gal/min @ 1200 rpm |
| Relief Valve Setting | 45V50A-86A22R |
| Shaft Type | 3 |
| Minor Diameter [Max | Flange |
| Weight | 3/8 in |
| Cover End Flow @ RPM | 22 |
| Max. RPM [Max | 50 gpm @ 1200 rpm |
| Port Orientation - Shaft End | 86 |
| Shaft Dia. | 1.5 in |
| Model No. | Straight w/ Key |
| Shaft Seal Type | 75 gpm @ 1800 rpm |
| Port Type | 45V |
| Shaft End RPM [Max | 2 15/16 in |
| Controlled Flow Rate | Single |
| Mounting | None |
| Port Size | 1 1/2 in Code 61 Flange |
| Pump Series | Buna-N |
| Shaft End Pressure [Max | 1800 |
| Integral Valve Configuration | 2500 psi |
| Minor Diameter | 75 |
| GPM @ 1,800 rpm, Shaft End | SAE C, 2 Bolt |
| Pilot Type | Single Shaft Seal |
| Major Diameter [Min | Opposite Inlet Port |
| Displacement Shaft End (cu in/revolution) | 45V50A-86A22R |
| Rotation | 9.9 |
| Cover End Pressure [Max | w/o Integral Valves |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump