Hydraulic Gear Pump Assy 113-15-00470 / 1131500470 for Bulldozer D31A-20
Pressure Port Size, Cover End: | 45.0 LB |
Mounting Flange: | Flange Mount |
Seal Material: | Right Hand (CW) |
Controlled Flow Rate: | 2520VQ21A5-1DD20 |
Port Size: | 2.5 |
Shaft Seal Type: | Flange |
Major Diameter [Min: | 3/16 in |
Model No.: | Standard Pilot |
PDF |
|
Product Details
Pressure Port Size, Cover End | 45.0 LB |
Mounting Flange | Flange Mount |
Seal Material | Right Hand (CW) |
Controlled Flow Rate | 2520VQ21A5-1DD20 |
Port Size | 2.5 |
Shaft Seal Type | Flange |
Major Diameter [Min | 3/16 in |
Model No. | Standard Pilot |
Spline Description | 0.875 in |
Relief Valve Setting | Straight w/ Key |
Shaft End RPM [Max | 2520VQ |
Rotation | 1 15/16 in |
Minor Diameter [Max | Double |
Shaft Key | Buna-N |
Displacement Cover End (cu in/revolution) | 2500 |
Shaft End Flow @ RPM | N/A |
Port Orientation - Shaft End | SAE B, 2 Bolt |
Pressure Port Size, Shaft End | Single Shaft Seal |
Mounting | N/A |
Minor Diameter | 2700 |
Port Type | 2500 |
Integral Valve Configuration | N/A |
Port Orientation - Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Major Diameter [Max | N/A |
Shaft End Pressure [Max | N/A |
Max. RPM [Max | N/A |
Pilot Type | N/A |
Cover End Flow @ RPM | N/A |
Minor Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | 4.1 |
Cover End RPM [Max | 3000 |
Shaft Dia. | 3000 |
Manufacturer Part No. | 7.5 |
Cover End Pressure [Max | 31.5 |
Weight | w/o Integral Valves |
GPM @ 1,800 rpm, Shaft End | Outlet 135° CW from Inlet |
Shaft Type | Outlet 90° CW from Inlet |
Shaft Length | 3/4 in Flange |
GPM @ 1,800 rpm, Cover End | 1 in Flange |
Pump Series | 1.1 |