Excavator PC300-5 Engine S6D108 Oil Pump Assembly 6221-51-1100
GPM @ 1,800 rpm, Cover End: | 76.0 LB |
GPM @ 1,800 rpm, Shaft End: | Flange Mount |
Port Type: | Left Hand (CCW) |
Mounting Flange: | 3525VQ30A12-11AA20-LH |
Controlled Flow Rate: | 3 |
Shaft Seal Type: | Flange |
Major Diameter [Max: | N/A |
Shaft End Flow @ RPM: | Standard Pilot |
PDF |
|
Product Details
GPM @ 1,800 rpm, Cover End | 76.0 LB |
GPM @ 1,800 rpm, Shaft End | Flange Mount |
Port Type | Left Hand (CCW) |
Mounting Flange | 3525VQ30A12-11AA20-LH |
Controlled Flow Rate | 3 |
Shaft Seal Type | Flange |
Major Diameter [Max | N/A |
Shaft End Flow @ RPM | Standard Pilot |
Minor Diameter | 1.25 in |
Relief Valve Setting | 14 Tooth Splined |
Model No. | 3525VQ |
Cover End Flow @ RPM | 1.9375 in |
Major Diameter [Min | Buna-N |
Pilot Type | 2500 |
Shaft End RPM [Max | 1.04 in |
Shaft Dia. | SAE C, 2 Bolt |
Pump Series | Single Shaft Seal |
Port Orientation - Shaft End | 12/24 |
Minor Diameter [Min | 2500 |
Shaft Type | 2500 |
Max. RPM [Max | N/A |
Port Orientation - Cover End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Manufacturer Part No. | 1.248 in |
Integral Valve Configuration | 1.247 in |
Seal Material | N/A |
Shaft End Pressure [Max | N/A |
Pressure Port Size, Cover End | N/A |
Minor Diameter [Max | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Cover End Pressure [Max | 3525VQ30A12-11AA20-LH |
Rotation | 3000 |
Shaft Key | 3000 |
Cover End RPM [Max | 18 |
Displacement Cover End (cu in/revolution) | 45 |
Shaft Length | w/o Integral Valves |
Weight | Outlet 135° CCW from Inlet |
Pressure Port Size, Shaft End | Outlet Opposite Inlet |
Displacement Shaft End (cu in/revolution) | 1 in Flange |
Port Size | 1 1/4 in Flange |
Mounting | 2.45 |
Spline Description | 5.96 |