Wheel Loader WA250-1 Hydraulic Oil Gear Pumps 705-51-20300
Minor Diameter [Max: | 75.0 LB |
Seal Material: | Flange Mount |
Manufacturer Part No.: | Right Hand (CW) |
Model No.: | 3520VQ30A5-11DD20 |
Major Diameter [Max: | 3 |
Pressure Port Size, Cover End: | Flange |
Shaft Key: | N/A |
Cover End RPM [Max: | Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Max | 75.0 LB |
Seal Material | Flange Mount |
Manufacturer Part No. | Right Hand (CW) |
Model No. | 3520VQ30A5-11DD20 |
Major Diameter [Max | 3 |
Pressure Port Size, Cover End | Flange |
Shaft Key | N/A |
Cover End RPM [Max | Standard Pilot |
Rotation | 1.25 in |
Minor Diameter [Min | 14 Tooth Splined |
Spline Description | 3520VQ |
Shaft End Flow @ RPM | 1 15/16 in |
Pressure Port Size, Shaft End | Buna-N |
GPM @ 1,800 rpm, Cover End | 2500 |
GPM @ 1,800 rpm, Shaft End | 1.04 in |
Port Type | SAE C, 2 Bolt |
Relief Valve Setting | Single Shaft Seal |
Weight | 12/24 |
Integral Valve Configuration | 2500 |
Displacement Cover End (cu in/revolution) | 2500 |
Port Orientation - Cover End | N/A |
Displacement Shaft End (cu in/revolution) | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Mounting Flange | 1.248 in |
Shaft Seal Type | 1.247 in |
Controlled Flow Rate | N/A |
Mounting | N/A |
Minor Diameter | N/A |
Cover End Flow @ RPM | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Shaft Dia. | 3520VQ30A5-11DD20 |
Cover End Pressure [Max | 3000 |
Port Orientation - Shaft End | 3000 |
Port Size | 7.5 |
Max. RPM [Max | 45 |
Major Diameter [Min | w/o Integral Valves |
Shaft Length | Outlet 135° CW from Inlet |
Shaft End RPM [Max | Outlet 90° CW from Inlet |
Shaft End Pressure [Max | 3/4 in Flange |
Pump Series | 1 1/4 in Flange |
Shaft Type | 1.1 |
Pilot Type | 5.96 |