Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
Shaft Dia.: | 76.0 LB |
Pump Series: | Flange Mount |
Major Diameter [Max: | Left Hand (CCW) |
Shaft End Pressure [Max: | 3525VQ30A12-11AA20-LH |
Cover End RPM [Max: | 3 |
GPM @ 1,800 rpm, Shaft End: | Flange |
Displacement Cover End (cu in/revolution): | N/A |
Major Diameter [Min: | Standard Pilot |
PDF |
|
Product Details
Shaft Dia. | 76.0 LB |
Pump Series | Flange Mount |
Major Diameter [Max | Left Hand (CCW) |
Shaft End Pressure [Max | 3525VQ30A12-11AA20-LH |
Cover End RPM [Max | 3 |
GPM @ 1,800 rpm, Shaft End | Flange |
Displacement Cover End (cu in/revolution) | N/A |
Major Diameter [Min | Standard Pilot |
Mounting Flange | 1.25 in |
Integral Valve Configuration | 14 Tooth Splined |
Relief Valve Setting | 3525VQ |
Spline Description | 1.9375 in |
Manufacturer Part No. | Buna-N |
Rotation | 2500 |
Pressure Port Size, Shaft End | 1.04 in |
Pilot Type | SAE C, 2 Bolt |
Shaft Key | Single Shaft Seal |
Minor Diameter | 12/24 |
Weight | 2500 |
Minor Diameter [Min | 2500 |
Port Size | N/A |
Pressure Port Size, Cover End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Shaft Length | 1.248 in |
Port Orientation - Shaft End | 1.247 in |
Cover End Flow @ RPM | N/A |
Shaft Type | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Mounting | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Max. RPM [Max | 3525VQ30A12-11AA20-LH |
Shaft End Flow @ RPM | 3000 |
Shaft End RPM [Max | 3000 |
Displacement Shaft End (cu in/revolution) | 18 |
Port Orientation - Cover End | 45 |
Port Type | w/o Integral Valves |
Minor Diameter [Max | Outlet 135° CCW from Inlet |
Shaft Seal Type | Outlet Opposite Inlet |
Seal Material | 1 in Flange |
Model No. | 1 1/4 in Flange |
Controlled Flow Rate | 2.45 |
Cover End Pressure [Max | 5.96 |