CAT 6E4719 Repair Rear Cartridge kit for Hydraulic Triple Pump
Mounting Flange: | 30.0 LB |
Port Orientation - Cover End: | Flange Mount |
Model No.: | Right Hand (CW) |
Pilot Type: | V2010-1F8S5S-11DC12 |
Port Orientation - Shaft End: | 1 1/2 |
Minor Diameter [Min: | Flange |
Port Size: | N/A |
Relief Valve Setting: | N/A |
PDF |
|
Product Details
Mounting Flange | 30.0 LB |
Port Orientation - Cover End | Flange Mount |
Model No. | Right Hand (CW) |
Pilot Type | V2010-1F8S5S-11DC12 |
Port Orientation - Shaft End | 1 1/2 |
Minor Diameter [Min | Flange |
Port Size | N/A |
Relief Valve Setting | N/A |
Pressure Port Size, Shaft End | 0.875 in |
Max. RPM [Max | 13 Tooth Splined |
Minor Diameter [Max | V2010 |
Shaft Seal Type | 1.3125 in |
Displacement Shaft End (cu in/revolution) | Buna-N |
Weight | 2800 |
Shaft End RPM [Max | 0.728 in |
Mounting | SAE B, 2 Bolt |
Major Diameter [Max | Single Shaft Seal |
Cover End Flow @ RPM | 16/32 |
Displacement Cover End (cu in/revolution) | 3000 |
Cover End Pressure [Max | 2800 |
Cover End RPM [Max | N/A |
Shaft Length | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Minor Diameter | 0.873 in |
Shaft End Pressure [Max | 0.872 in |
Shaft Type | 0.7335 in |
Shaft End Flow @ RPM | 0.7225 in |
Seal Material | N/A |
Rotation | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | V2010-1F8S5S-11DC12 |
GPM @ 1,800 rpm, Cover End | 2500 |
Spline Description | 2500 |
Controlled Flow Rate | 7.5 |
Shaft Dia. | 12 |
Integral Valve Configuration | N/A |
Shaft Key | Outlet 45° CW from Inlet |
Manufacturer Part No. | Outlet 90° CW from Inlet |
Major Diameter [Min | 1/2 in SAE O-Ring |
Pump Series | 3/4 in SAE O-Ring |
Pressure Port Size, Cover End | 1 |
Port Type | 1.62 |