Rexroth S25A check valve
Our highly-skilled and factory-trained service experts have the resources to help IR series: you with all your Rexroth S25A check valve needs DIN 620 standards met: - including routine maintenance, major repairs, warranty service, and Rexroth check valve equipment inspections.
| Brand Name: | Rexroth |
| Model Number: | S25A |
| Cover End Pressure [Max: | 30.0 LB |
| Shaft Dia.: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Weight: | V2010-1F7S6S-11DD12 |
| Minor Diameter: | 1 1/2 |
| Shaft End Pressure [Max: | Flange |
| Pressure Port Size, Cover End: | N/A |
| Minor Diameter [Max: | N/A |
Product Details
| Cover End Pressure [Max | 30.0 LB |
| Shaft Dia. | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Weight | V2010-1F7S6S-11DD12 |
| Minor Diameter | 1 1/2 |
| Shaft End Pressure [Max | Flange |
| Pressure Port Size, Cover End | N/A |
| Minor Diameter [Max | N/A |
| Pump Series | 0.875 in |
| Rotation | 13 Tooth Splined |
| Displacement Cover End (cu in/revolution) | V2010 |
| Shaft End RPM [Max | 1.3125 in |
| Shaft Seal Type | Buna-N |
| GPM @ 1,800 rpm, Cover End | 3000 |
| Port Orientation - Shaft End | 0.728 in |
| Port Orientation - Cover End | SAE B, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
| Port Size | 16/32 |
| Major Diameter [Min | 3000 |
| Shaft Key | 3000 |
| Manufacturer Part No. | N/A |
| Pressure Port Size, Shaft End | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Spline Description | 0.873 in |
| Shaft Length | 0.872 in |
| Controlled Flow Rate | 0.7335 in |
| Model No. | 0.7225 in |
| Pilot Type | N/A |
| Mounting | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | V2010-1F7S6S-11DD12 |
| Port Type | 2200 |
| Major Diameter [Max | 2500 |
| GPM @ 1,800 rpm, Shaft End | 9 |
| Cover End Flow @ RPM | 10.5 |
| Seal Material | N/A |
| Max. RPM [Max | Outlet 135° CW from Inlet |
| Relief Valve Setting | Outlet 90° CW from Inlet |
| Shaft End Flow @ RPM | 1/2 in SAE O-Ring |
| Shaft Type | 3/4 in SAE O-Ring |
| Mounting Flange | 1.19 |
| Minor Diameter [Min | 1.39 |
