DEUTZ DLLA 155P 2312 injector
DEUTZ DLLA 155P 2312 injector Bearings with Housin Type Needs Analysis Deep Groove Ball Bea Bearing Used , ZZ (Double Shield) Seals DEUTZ injector DCM Hydraulic Pump Equipment Co., Ltd. Manufacturing Service . Get Your Free.
| Brand Name: | DEUTZ |
| Model Number: | DLLA 155P 2312 |
| GPM @ 1,800 rpm, Shaft End: | 45.0 LB |
| Max. RPM [Max: | Flange Mount |
| Minor Diameter [Max: | Right Hand (CW) |
| Manufacturer Part No.: | 2520VQ12A5-11DD20 |
| Shaft Seal Type: | 2 1/2 |
| Pressure Port Size, Shaft End: | Flange |
| Weight: | N/A |
| Pressure Port Size, Cover End: | Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End | 45.0 LB |
| Max. RPM [Max | Flange Mount |
| Minor Diameter [Max | Right Hand (CW) |
| Manufacturer Part No. | 2520VQ12A5-11DD20 |
| Shaft Seal Type | 2 1/2 |
| Pressure Port Size, Shaft End | Flange |
| Weight | N/A |
| Pressure Port Size, Cover End | Standard Pilot |
| Displacement Cover End (cu in/revolution) | 0.875 in |
| Shaft Dia. | 13 Tooth Splined |
| Pump Series | 2520VQ |
| Rotation | 1 3/8 in |
| Minor Diameter [Min | Buna-N |
| Displacement Shaft End (cu in/revolution) | 2700 |
| Model No. | 0.715 in |
| Shaft End Pressure [Max | SAE B, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| Port Type | 16/32 |
| Shaft End Flow @ RPM | 2700 |
| Spline Description | 2700 |
| Shaft Type | N/A |
| Port Orientation - Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 0.873 in |
| Shaft Length | 0.872 in |
| Relief Valve Setting | N/A |
| Shaft Key | N/A |
| Mounting | N/A |
| Cover End RPM [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 2520VQ12A5-11DD20 |
| Mounting Flange | 3000 |
| Pilot Type | 3000 |
| Major Diameter [Min | 7.5 |
| Integral Valve Configuration | 18 |
| Seal Material | w/o Integral Valves |
| Cover End Flow @ RPM | Outlet 135° CW from Inlet |
| Cover End Pressure [Max | Outlet 90° CW from Inlet |
| Port Orientation - Shaft End | 3/4 in Flange |
| Minor Diameter | 1 in Flange |
| Controlled Flow Rate | 1.1 |
| Port Size | 2.45 |
