DSG-03-3C12/ DSG03-3c12 Hydraulic Spool Control Valve
| Port Size: |
30.0 LB |
| Major Diameter [Max: |
Flange Mount |
| Cover End Pressure [Max: |
Left Hand (CCW) |
| Pilot Type: |
V2010-1F6S3S-11CC12L |
| Spline Description: |
1 1/2 |
| Controlled Flow Rate: |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Pressure Port Size, Shaft End: |
N/A |
| PDF |
|
Product Details
| Port Size |
30.0 LB |
| Major Diameter [Max |
Flange Mount |
| Cover End Pressure [Max |
Left Hand (CCW) |
| Pilot Type |
V2010-1F6S3S-11CC12L |
| Spline Description |
1 1/2 |
| Controlled Flow Rate |
Flange |
| Shaft End Pressure [Max |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Dia. |
0.875 in |
| Port Type |
13 Tooth Splined |
| Relief Valve Setting |
V2010 |
| Mounting Flange |
1 5/16 in |
| Pressure Port Size, Cover End |
Buna-N |
| Displacement Shaft End (cu in/revolution) |
3000 |
| Shaft Type |
0.728 in |
| Cover End Flow @ RPM |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
Single Shaft Seal |
| Port Orientation - Cover End |
16/32 |
| Shaft Seal Type |
3000 |
| Major Diameter [Min |
3000 |
| Port Orientation - Shaft End |
N/A |
| Weight |
3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
| Pump Series |
0.873 in |
| Displacement Cover End (cu in/revolution) |
0.872 in |
| Shaft End RPM [Max |
0.7335 in |
| GPM @ 1,800 rpm, Cover End |
0.7225 in |
| Integral Valve Configuration |
N/A |
| Shaft Length |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Minor Diameter [Min |
V2010-1F6S3S-11CC12L |
| Seal Material |
2500 |
| Manufacturer Part No. |
2500 |
| Mounting |
4.5 |
| Model No. |
9 |
| Shaft Key |
N/A |
| Rotation |
Outlet 45° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet Inline w/Inlet |
| Cover End RPM [Max |
1/2 in SAE O-Ring |
| Minor Diameter |
3/4 in SAE O-Ring |
| Max. RPM [Max |
0.6 |
| Minor Diameter [Max |
1.19 |