Oil Pump 6206-51-1200 for Japan Excavator PC120-3 Engine 4D95 6D95L
| Spline Description: |
76.0 LB |
| Shaft Dia.: |
Flange Mount |
| Shaft Key: |
Left Hand (CCW) |
| Mounting Flange: |
3525VQ21A12-11AA20-LH |
| Major Diameter [Min: |
3 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Displacement Shaft End (cu in/revolution): |
N/A |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Spline Description |
76.0 LB |
| Shaft Dia. |
Flange Mount |
| Shaft Key |
Left Hand (CCW) |
| Mounting Flange |
3525VQ21A12-11AA20-LH |
| Major Diameter [Min |
3 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Relief Valve Setting |
Standard Pilot |
| Minor Diameter |
1.25 in |
| Max. RPM [Max |
14 Tooth Splined |
| Model No. |
3525VQ |
| Port Orientation - Cover End |
1 15/16 in |
| Minor Diameter [Min |
Buna-N |
| Mounting |
2500 |
| Cover End Flow @ RPM |
1.04 in |
| Rotation |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Port Type |
12/24 |
| Integral Valve Configuration |
2500 |
| Manufacturer Part No. |
2500 |
| Minor Diameter [Max |
N/A |
| GPM @ 1,800 rpm, Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
1.248 in |
| Shaft Length |
1.247 in |
| Port Size |
N/A |
| Shaft End Pressure [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Major Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
3525VQ21A12-11AA20-LH |
| Pump Series |
3000 |
| Weight |
3000 |
| Seal Material |
18 |
| Controlled Flow Rate |
31.5 |
| Shaft Seal Type |
w/o Integral Valves |
| Shaft End Flow @ RPM |
Outlet 135° CCW from Inlet |
| Pilot Type |
Outlet Opposite Inlet |
| Shaft Type |
1 in Flange |
| Cover End RPM [Max |
1 1/4 in Flange |
| Shaft End RPM [Max |
2.45 |
| Cover End Pressure [Max |
4.12 |