Bulldozer D65 Hydraulic Gear Pump Pilot Pump 705-51-20370
| Displacement Cover End (cu in/revolution): |
50.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Cover End Flow @ RPM: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: |
38 gal/min @ 1200 rpm |
| Shaft Length: |
35VQ38A-11C20 |
| Port Orientation - Shaft End: |
2 |
| Controlled Flow Rate: |
Flange |
| Rotation: |
N/A |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) |
50.0 LB |
| Relief Valve Setting |
Flange Mount |
| Cover End Flow @ RPM |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End |
38 gal/min @ 1200 rpm |
| Shaft Length |
35VQ38A-11C20 |
| Port Orientation - Shaft End |
2 |
| Controlled Flow Rate |
Flange |
| Rotation |
N/A |
| Shaft End Flow @ RPM |
20 |
| Integral Valve Configuration |
38 gpm @ 1200 rpm |
| Shaft End RPM [Max |
11 |
| Shaft End Pressure [Max |
1.25 in |
| Major Diameter [Max |
14 Tooth Splined |
| Port Type |
57 gpm @ 1800 rpm |
| Spline Description |
35VQ |
| Pilot Type |
1 15/16 in |
| Mounting |
Single |
| Minor Diameter [Max |
None |
| Shaft Key |
1 1/4 in Flange |
| Pump Series |
Buna-N |
| Seal Material |
2400 |
| Mounting Flange |
3000 psi |
| Minor Diameter [Min |
57 |
| Port Orientation - Cover End |
A |
| Major Diameter [Min |
SAE C, 2 Bolt |
| Minor Diameter |
Single Shaft Seal |
| Weight |
Inline w/ Inlet |
| Max. RPM [Max |
35VQ38A-11C20 |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Manufacturer Part No. |
w/o Integral Valves |