Replace Caterpillar Wheel Loader 910 Hydraulic Gear Pump 8J8813
| Mounting: |
45.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Minor Diameter [Min: |
Right Hand (CW) |
| Manufacturer Part No.: |
2520VQ17A5-1DC20 |
| Pressure Port Size, Shaft End: |
2 1/2 |
| Shaft Key: |
Flange |
| Displacement Cover End (cu in/revolution): |
3/16 in |
| Rotation: |
Standard Pilot |
| PDF |
|
Product Details
| Mounting |
45.0 LB |
| Max. RPM [Max |
Flange Mount |
| Minor Diameter [Min |
Right Hand (CW) |
| Manufacturer Part No. |
2520VQ17A5-1DC20 |
| Pressure Port Size, Shaft End |
2 1/2 |
| Shaft Key |
Flange |
| Displacement Cover End (cu in/revolution) |
3/16 in |
| Rotation |
Standard Pilot |
| Minor Diameter |
0.875 in |
| Seal Material |
Straight w/ Key |
| Port Type |
2520VQ |
| Integral Valve Configuration |
1.9375 in |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| Major Diameter [Min |
2500 |
| Major Diameter [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Controlled Flow Rate |
N/A |
| Shaft Dia. |
2700 |
| Shaft End RPM [Max |
2500 |
| Pilot Type |
N/A |
| Pressure Port Size, Cover End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Model No. |
N/A |
| Relief Valve Setting |
N/A |
| Shaft Type |
N/A |
| Spline Description |
N/A |
| Minor Diameter [Max |
N/A |
| Pump Series |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2520VQ17A5-1DC20 |
| Port Orientation - Shaft End |
3000 |
| Displacement Shaft End (cu in/revolution) |
3000 |
| Shaft End Flow @ RPM |
7.5 |
| Port Size |
25.5 |
| Cover End Flow @ RPM |
w/o Integral Valves |
| Shaft Length |
Outlet 45° CW from Inlet |
| Port Orientation - Cover End |
Outlet 90° CW from Inlet |
| Cover End RPM [Max |
3/4 in Flange |
| Shaft End Pressure [Max |
1 in Flange |
| Mounting Flange |
1.1 |
| Weight |
3.37 |