ALP1/ALP1A-D-2/3/4/5/6/7/9/11/13 High Pressure Small Gear Pump
| Mounting: |
75.0 LB |
| Displacement Shaft End (cu in/revolution): |
Flange Mount |
| Pump Series: |
Right Hand (CW) |
| Port Orientation - Shaft End: |
3520VQ35A5-1AA20 |
| Port Type: |
3 |
| GPM @ 1,800 rpm, Shaft End: |
Flange |
| Shaft End RPM [Max: |
5/16 in |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Mounting |
75.0 LB |
| Displacement Shaft End (cu in/revolution) |
Flange Mount |
| Pump Series |
Right Hand (CW) |
| Port Orientation - Shaft End |
3520VQ35A5-1AA20 |
| Port Type |
3 |
| GPM @ 1,800 rpm, Shaft End |
Flange |
| Shaft End RPM [Max |
5/16 in |
| Relief Valve Setting |
Standard Pilot |
| Max. RPM [Max |
1.25 in |
| Major Diameter [Min |
Straight w/ Key |
| Cover End Pressure [Max |
3520VQ |
| Controlled Flow Rate |
2 1/2 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Shaft Dia. |
2400 |
| Minor Diameter |
N/A |
| Pilot Type |
SAE C, 2 Bolt |
| Pressure Port Size, Cover End |
Single Shaft Seal |
| Weight |
N/A |
| Port Orientation - Cover End |
2500 |
| Rotation |
2400 |
| Shaft Key |
N/A |
| Minor Diameter [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Integral Valve Configuration |
N/A |
| Minor Diameter [Min |
N/A |
| Model No. |
N/A |
| Shaft Seal Type |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3520VQ35A5-1AA20 |
| Pressure Port Size, Shaft End |
3000 |
| Shaft Length |
3000 |
| Seal Material |
7.5 |
| Shaft End Pressure [Max |
52.5 |
| Spline Description |
w/o Integral Valves |
| Major Diameter [Max |
Outlet 135° CCW from Inlet |
| Mounting Flange |
Outlet Opposite Inlet |
| Cover End Flow @ RPM |
3/4 in Flange |
| Shaft End Flow @ RPM |
1 1/4 in Flange |
| Shaft Type |
1.1 |
| Port Size |
6.88 |