Hydstar 25VQT Thru Drive Hydraulic Vane Pump for Vickers
| Shaft Dia.: |
45.0 LB |
| Minor Diameter: |
Flange Mount |
| Shaft End Pressure [Max: |
Left Hand (CCW) |
| Port Orientation - Cover End: |
2520VQ21A11-11BC20-LH |
| GPM @ 1,800 rpm, Shaft End: |
2.5 |
| Relief Valve Setting: |
Flange |
| Rotation: |
N/A |
| Seal Material: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Dia. |
45.0 LB |
| Minor Diameter |
Flange Mount |
| Shaft End Pressure [Max |
Left Hand (CCW) |
| Port Orientation - Cover End |
2520VQ21A11-11BC20-LH |
| GPM @ 1,800 rpm, Shaft End |
2.5 |
| Relief Valve Setting |
Flange |
| Rotation |
N/A |
| Seal Material |
Standard Pilot |
| Port Orientation - Shaft End |
0.875 in |
| Port Size |
13 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
2520VQ |
| Cover End Flow @ RPM |
1.375 in |
| Shaft Type |
Double |
| Cover End RPM [Max |
Buna-N |
| Port Type |
2500 |
| Model No. |
0.715 in |
| Major Diameter [Max |
SAE B, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| Manufacturer Part No. |
16/32 |
| Max. RPM [Max |
2700 |
| Controlled Flow Rate |
2500 |
| Shaft Seal Type |
N/A |
| Displacement Cover End (cu in/revolution) |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Mounting Flange |
0.873 in |
| Shaft Length |
0.872 in |
| Pilot Type |
N/A |
| Weight |
N/A |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Minor Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
2520VQ21A11-11BC20-LH |
| Cover End Pressure [Max |
3000 |
| Pump Series |
3000 |
| Mounting |
16.5 |
| Shaft Key |
31.5 |
| Major Diameter [Min |
w/o Integral Valves |
| Shaft End RPM [Max |
Outlet 45° CW from Inlet |
| Pressure Port Size, Shaft End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Spline Description |
1 in Flange |
| Shaft End Flow @ RPM |
2.2 |