Hydstar Selling CAT Transmission Pump Hydraulic Gear Pump 3P6814
| Spline Description: |
45.0 LB |
| Port Size: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End: |
2520VQ14A14-11DD20 |
| Major Diameter [Max: |
2 1/2 |
| Relief Valve Setting: |
Flange |
| Shaft End Flow @ RPM: |
N/A |
| Port Orientation - Shaft End: |
Standard Pilot |
| PDF |
|
Product Details
| Spline Description |
45.0 LB |
| Port Size |
Flange Mount |
| Rotation |
Right Hand (CW) |
| GPM @ 1,800 rpm, Shaft End |
2520VQ14A14-11DD20 |
| Major Diameter [Max |
2 1/2 |
| Relief Valve Setting |
Flange |
| Shaft End Flow @ RPM |
N/A |
| Port Orientation - Shaft End |
Standard Pilot |
| Mounting |
0.875 in |
| Cover End Flow @ RPM |
13 Tooth Splined |
| Integral Valve Configuration |
2520VQ |
| Weight |
1.375 in |
| Mounting Flange |
Buna-N |
| Minor Diameter [Max |
2700 |
| Shaft End RPM [Max |
0.715 in |
| Seal Material |
SAE B, 2 Bolt |
| Minor Diameter |
Single Shaft Seal |
| Minor Diameter [Min |
16/32 |
| Cover End Pressure [Max |
2700 |
| GPM @ 1,800 rpm, Cover End |
2700 |
| Shaft Type |
N/A |
| Manufacturer Part No. |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End |
0.873 in |
| Pump Series |
0.872 in |
| Model No. |
N/A |
| Controlled Flow Rate |
N/A |
| Major Diameter [Min |
N/A |
| Shaft Length |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
2520VQ14A14-11DD20 |
| Shaft Key |
2000 |
| Displacement Cover End (cu in/revolution) |
3000 |
| Shaft Dia. |
21 |
| Displacement Shaft End (cu in/revolution) |
21 |
| Pilot Type |
w/o Integral Valves |
| Cover End RPM [Max |
Outlet 135° CW from Inlet |
| Max. RPM [Max |
Outlet 90° CW from Inlet |
| Shaft Seal Type |
3/4 in Flange |
| Port Orientation - Cover End |
1 in Flange |
| Shaft End Pressure [Max |
2.8 |
| Port Type |
2.77 |