HGP333A/HGP-333A Triple Gear Pump Hydraulic
| GPM @ 1,800 rpm, Cover End: |
45.0 LB |
| Major Diameter [Min: |
Flange Mount |
| Port Orientation - Cover End: |
Right Hand (CW) |
| Controlled Flow Rate: |
2520VQ14A11-11CC20 |
| Cover End RPM [Max: |
2.5 |
| Relief Valve Setting: |
Flange |
| Mounting: |
N/A |
| Weight: |
Standard Pilot |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Cover End |
45.0 LB |
| Major Diameter [Min |
Flange Mount |
| Port Orientation - Cover End |
Right Hand (CW) |
| Controlled Flow Rate |
2520VQ14A11-11CC20 |
| Cover End RPM [Max |
2.5 |
| Relief Valve Setting |
Flange |
| Mounting |
N/A |
| Weight |
Standard Pilot |
| Cover End Flow @ RPM |
0.875 in |
| Pressure Port Size, Cover End |
13 Tooth Splined |
| Cover End Pressure [Max |
2520VQ |
| Seal Material |
1 3/8 in |
| Displacement Shaft End (cu in/revolution) |
2.8 |
| Pressure Port Size, Shaft End |
Buna-N |
| Mounting Flange |
2700 |
| Model No. |
0.715 in |
| Port Size |
SAE B, 2 Bolt |
| Major Diameter [Max |
Single Shaft Seal |
| Manufacturer Part No. |
16/32 |
| Pump Series |
2700 |
| Shaft End Pressure [Max |
2700 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Shaft Dia. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Spline Description |
0.873 in |
| Shaft Seal Type |
0.872 in |
| Port Type |
N/A |
| Minor Diameter [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Shaft Length |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
2520VQ14A11-11CC20 |
| Shaft End Flow @ RPM |
3000 |
| Pilot Type |
3000 |
| Shaft Type |
16.5 |
| Shaft Key |
21 |
| Minor Diameter |
w/o Integral Valves |
| Max. RPM [Max |
Outlet 45° CW from Inlet |
| Minor Diameter [Min |
Outlet Inline w/Inlet |
| Integral Valve Configuration |
3/4 in Flange |
| Rotation |
1 in Flange |
| Port Orientation - Shaft End |
2.2 |