6754-71-1012 / 6754-71-7200 Diesel Fuel Injection Pump Assembly for PC240-8 PC200-8
| Shaft End Flow @ RPM: |
33.0 LB |
| Rotation: |
Flange Mount |
| Minor Diameter [Min: |
Right Hand (CW) |
| Shaft Seal Type: |
17 gal/min @ 1200 rpm |
| GPM @ 1,800 rpm, Shaft End: |
25V17A-11C22R |
| Integral Valve Configuration: |
1.5 |
| Pressure Port Size, Shaft End: |
Flange |
| Weight: |
N/A |
| PDF |
|
Product Details
| Shaft End Flow @ RPM |
33.0 LB |
| Rotation |
Flange Mount |
| Minor Diameter [Min |
Right Hand (CW) |
| Shaft Seal Type |
17 gal/min @ 1200 rpm |
| GPM @ 1,800 rpm, Shaft End |
25V17A-11C22R |
| Integral Valve Configuration |
1.5 |
| Pressure Port Size, Shaft End |
Flange |
| Weight |
N/A |
| Cover End Flow @ RPM |
22 |
| Port Orientation - Cover End |
17 gpm @ 1200 rpm |
| Mounting Flange |
11 |
| Seal Material |
0.875 in |
| Max. RPM [Max |
13 Tooth Splined |
| Manufacturer Part No. |
25.5 gpm @ 1800 rpm |
| Pump Series |
25V |
| Controlled Flow Rate |
1 1/4 in |
| Cover End Pressure [Max |
Single |
| Port Type |
None |
| Major Diameter [Max |
1 in Code 61 Flange |
| Port Orientation - Shaft End |
Buna-N |
| Spline Description |
1800 |
| Displacement Cover End (cu in/revolution) |
2500 psi |
| Shaft Key |
25 1/2 |
| Shaft Dia. |
SAE B, 2 Bolt |
| Mounting |
Single Shaft Seal |
| Major Diameter [Min |
Inline w/ Inlet |
| Minor Diameter |
25V17A-11C22R |
| Shaft Length |
3.4 |
| Displacement Shaft End (cu in/revolution) |
w/o Integral Valves |