EX350 EX300-5 Diesel Engine 6SD1T Water Pump 1-13650068-1 for isuzu
| Displacement Cover End (cu in/revolution): |
35.0 LB |
| Minor Diameter [Max: |
Flange Mount |
| Weight: |
Left Hand (CCW) |
| Port Type: |
V2020-1F13S7S-11AA30LH |
| Seal Material: |
2 |
| Major Diameter [Max: |
Flange |
| Pressure Port Size, Shaft End: |
N/A |
| Manufacturer Part No.: |
N/A |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) |
35.0 LB |
| Minor Diameter [Max |
Flange Mount |
| Weight |
Left Hand (CCW) |
| Port Type |
V2020-1F13S7S-11AA30LH |
| Seal Material |
2 |
| Major Diameter [Max |
Flange |
| Pressure Port Size, Shaft End |
N/A |
| Manufacturer Part No. |
N/A |
| Shaft End Flow @ RPM |
0.875 in |
| Relief Valve Setting |
13 Tooth Splined |
| Shaft Dia. |
V2020 |
| Max. RPM [Max |
1 5/16 in |
| Rotation |
Buna-N |
| Spline Description |
2400 |
| GPM @ 1,800 rpm, Cover End |
0.728 in |
| Mounting Flange |
SAE B, 2 Bolt |
| Integral Valve Configuration |
Single Shaft Seal |
| Cover End RPM [Max |
16/32 |
| Port Orientation - Cover End |
2500 |
| Pilot Type |
2400 |
| Pump Series |
N/A |
| Minor Diameter [Min |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Shaft Length |
0.873 in |
| Cover End Flow @ RPM |
0.872 in |
| Shaft Type |
0.7335 in |
| Shaft Key |
0.7225 in |
| Pressure Port Size, Cover End |
N/A |
| Port Orientation - Shaft End |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
V2020-1F13S7S-11AA30LH |
| Port Size |
2500 |
| Minor Diameter |
2200 |
| Mounting |
10.5 |
| Model No. |
19.5 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Shaft End Pressure [Max |
Outlet Opposite Inlet |
| Shaft Seal Type |
Outlet Opposite Inlet |
| Cover End Pressure [Max |
3/4 in SAE O-Ring |
| Major Diameter [Min |
3/4 in SAE O-Ring |
| Controlled Flow Rate |
1.39 |
| Shaft End RPM [Max |
2.59 |