Hydraulic Gear Pump 705-41-08070 for Excavator PC15-3/PC10-7/PC20-7
| Minor Diameter: |
45.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| Shaft End RPM [Max: |
Right Hand (CW) |
| Port Orientation - Shaft End: |
2520VQ14A14-11CC20 |
| Spline Description: |
2 1/2 |
| Weight: |
Flange |
| Pump Series: |
N/A |
| Shaft Seal Type: |
Standard Pilot |
| PDF |
|
Product Details
| Minor Diameter |
45.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| Shaft End RPM [Max |
Right Hand (CW) |
| Port Orientation - Shaft End |
2520VQ14A14-11CC20 |
| Spline Description |
2 1/2 |
| Weight |
Flange |
| Pump Series |
N/A |
| Shaft Seal Type |
Standard Pilot |
| Major Diameter [Max |
0.875 in |
| Relief Valve Setting |
13 Tooth Splined |
| Pressure Port Size, Cover End |
2520VQ |
| Mounting Flange |
1 3/8 in |
| Pressure Port Size, Shaft End |
Buna-N |
| Rotation |
2700 |
| Cover End Flow @ RPM |
0.715 in |
| Shaft Dia. |
SAE B, 2 Bolt |
| Cover End Pressure [Max |
Single Shaft Seal |
| Max. RPM [Max |
16/32 |
| Shaft Length |
2700 |
| Minor Diameter [Max |
2700 |
| Pilot Type |
N/A |
| GPM @ 1,800 rpm, Shaft End |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft Type |
0.873 in |
| Port Orientation - Cover End |
0.872 in |
| Port Size |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Integral Valve Configuration |
N/A |
| Cover End RPM [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
2520VQ14A14-11CC20 |
| Port Type |
2000 |
| Mounting |
3000 |
| Controlled Flow Rate |
21 |
| Shaft Key |
21 |
| Displacement Cover End (cu in/revolution) |
w/o Integral Valves |
| Minor Diameter [Min |
Outlet 45° CW from Inlet |
| Displacement Shaft End (cu in/revolution) |
Outlet Inline w/Inlet |
| Manufacturer Part No. |
3/4 in Flange |
| Model No. |
1 in Flange |
| Seal Material |
2.8 |
| Major Diameter [Min |
2.77 |