Hydraulic Vane Pump Shaft 9J5100 9J5101 9J5102 9J5104 6E3651 For Caterpillar
| Displacement Shaft End (cu in/revolution): |
45.0 LB |
| Port Type: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Cover End Flow @ RPM: |
2520VQ21E11-11DD20 |
| Major Diameter [Min: |
2 1/2 |
| Model No.: |
Flange |
| Cover End Pressure [Max: |
N/A |
| Minor Diameter: |
Standard Pilot |
| PDF |
|
Product Details
| Displacement Shaft End (cu in/revolution) |
45.0 LB |
| Port Type |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Cover End Flow @ RPM |
2520VQ21E11-11DD20 |
| Major Diameter [Min |
2 1/2 |
| Model No. |
Flange |
| Cover End Pressure [Max |
N/A |
| Minor Diameter |
Standard Pilot |
| Shaft Dia. |
0.875 in |
| Major Diameter [Max |
13 Tooth Splined |
| Shaft End RPM [Max |
2520VQ |
| Shaft Length |
1 3/8 in |
| Pressure Port Size, Cover End |
Buna-N |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Minor Diameter [Min |
0.715 in |
| Cover End RPM [Max |
SAE B, 2 Bolt |
| Pump Series |
Single Shaft Seal |
| Controlled Flow Rate |
16/32 |
| Displacement Cover End (cu in/revolution) |
2700 |
| Mounting Flange |
2500 |
| Minor Diameter [Max |
N/A |
| Weight |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
0.873 in |
| Shaft End Pressure [Max |
0.872 in |
| Seal Material |
N/A |
| Shaft Key |
N/A |
| Port Orientation - Shaft End |
N/A |
| GPM @ 1,800 rpm, Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pilot Type |
2520VQ21E11-11DD20 |
| Rotation |
3000 |
| Pressure Port Size, Shaft End |
3000 |
| Shaft Seal Type |
16.5 |
| Integral Valve Configuration |
31.5 |
| Shaft Type |
w/o Integral Valves |
| Port Size |
Outlet 135° CW from Inlet |
| Spline Description |
Outlet 90° CW from Inlet |
| Manufacturer Part No. |
1 1/16 in SAE O-Ring |
| Max. RPM [Max |
1 in Flange |
| Relief Valve Setting |
2.22 |
| Mounting |
4.12 |