Hydstar brand Excavator Parts Engine 4TNV84 4TNE88 Water Pump 129002-42004
| GPM @ 1,800 rpm, Shaft End: |
76.0 LB |
| Port Orientation - Cover End: |
Flange Mount |
| Model No.: |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: |
3525VQ35A21-1CC20 |
| Mounting Flange: |
3 |
| Displacement Shaft End (cu in/revolution): |
6.9 |
| Shaft Type: |
5/16 in |
| Seal Material: |
Standard Pilot |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Shaft End |
76.0 LB |
| Port Orientation - Cover End |
Flange Mount |
| Model No. |
Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End |
3525VQ35A21-1CC20 |
| Mounting Flange |
3 |
| Displacement Shaft End (cu in/revolution) |
6.9 |
| Shaft Type |
5/16 in |
| Seal Material |
Standard Pilot |
| Port Orientation - Shaft End |
1.25 in |
| Port Type |
Straight w/ Key |
| Cover End Flow @ RPM |
3525VQ |
| Shaft Length |
2.5 in |
| Minor Diameter [Min |
Double |
| Integral Valve Configuration |
Buna-N |
| Cover End RPM [Max |
2400 |
| Mounting |
N/A |
| Max. RPM [Max |
SAE C, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Pressure Port Size, Cover End |
N/A |
| Cover End Pressure [Max |
2500 |
| Shaft End RPM [Max |
2400 |
| Controlled Flow Rate |
N/A |
| Shaft Dia. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Spline Description |
N/A |
| Major Diameter [Max |
N/A |
| Weight |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Relief Valve Setting |
N/A |
| Pump Series |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Pilot Type |
3525VQ35A21-1CC20 |
| Port Size |
3000 |
| Shaft Seal Type |
3000 |
| Manufacturer Part No. |
31.5 |
| Minor Diameter |
52.5 |
| Shaft End Pressure [Max |
w/o Integral Valves |
| Rotation |
Outlet 45° CW from Inlet |
| Shaft Key |
Outlet Inline w/Inlet |
| Minor Diameter [Max |
1 in Flange |
| Shaft End Flow @ RPM |
1 1/4 in Flange |
| Major Diameter [Min |
4.1 |