Hydraulic Gear Pump 708-3T-04610 Fit Excavator PC78us-6
| Major Diameter [Max: |
45.0 LB |
| Shaft Dia.: |
Flange Mount |
| Shaft Length: |
Left Hand (CCW) |
| Max. RPM [Max: |
2520VQ12A5-11BC20LH |
| Shaft Key: |
2 1/2 |
| Manufacturer Part No.: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
N/A |
| Pressure Port Size, Cover End: |
Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Max |
45.0 LB |
| Shaft Dia. |
Flange Mount |
| Shaft Length |
Left Hand (CCW) |
| Max. RPM [Max |
2520VQ12A5-11BC20LH |
| Shaft Key |
2 1/2 |
| Manufacturer Part No. |
Flange |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pressure Port Size, Cover End |
Standard Pilot |
| Pump Series |
0.875 in |
| Pressure Port Size, Shaft End |
13 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End |
2520VQ |
| Controlled Flow Rate |
1 3/8 in |
| Port Orientation - Cover End |
Buna-N |
| Rotation |
2700 |
| Shaft End Pressure [Max |
0.715 in |
| Seal Material |
SAE B, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Mounting Flange |
16/32 |
| Shaft End RPM [Max |
2700 |
| Cover End RPM [Max |
2700 |
| Relief Valve Setting |
N/A |
| Port Orientation - Shaft End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
0.873 in |
| Pilot Type |
0.872 in |
| Minor Diameter |
N/A |
| Mounting |
N/A |
| Weight |
N/A |
| Shaft End Flow @ RPM |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Spline Description |
2520VQ12A5-11BC20LH |
| Shaft Seal Type |
3000 |
| Cover End Flow @ RPM |
3000 |
| Displacement Shaft End (cu in/revolution) |
7.5 |
| Port Size |
18 |
| Integral Valve Configuration |
w/o Integral Valves |
| Model No. |
Outlet 45° CW from Inlet |
| Displacement Cover End (cu in/revolution) |
Outlet 90° CCW from Inlet |
| Port Type |
3/4 in Flange |
| Cover End Pressure [Max |
1 in Flange |
| Minor Diameter [Max |
1.1 |
| Shaft Type |
2.45 |