Hydraulic Steering Pump 07440-72202 for Bulldozer D155A-2 Spare Parts
| Cover End Flow @ RPM: |
30.0 LB |
| GPM @ 1,800 rpm, Cover End: |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Shaft Dia.: |
V2010-1F8S5S-11CC12 |
| Seal Material: |
1.5 |
| Shaft Length: |
Flange |
| Model No.: |
N/A |
| Shaft Seal Type: |
N/A |
| PDF |
|
Product Details
| Cover End Flow @ RPM |
30.0 LB |
| GPM @ 1,800 rpm, Cover End |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Shaft Dia. |
V2010-1F8S5S-11CC12 |
| Seal Material |
1.5 |
| Shaft Length |
Flange |
| Model No. |
N/A |
| Shaft Seal Type |
N/A |
| Mounting Flange |
0.875 in |
| Spline Description |
13 Tooth Splined |
| Pressure Port Size, Cover End |
V2010 |
| Pilot Type |
1 5/16 in |
| Max. RPM [Max |
Double |
| Port Orientation - Shaft End |
Buna-N |
| Shaft End RPM [Max |
2800 |
| Controlled Flow Rate |
0.728 in |
| Pump Series |
SAE B, 2 Bolt |
| Port Size |
Single Shaft Seal |
| GPM @ 1,800 rpm, Shaft End |
16/32 |
| Minor Diameter [Min |
3000 |
| Weight |
2800 |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Key |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Integral Valve Configuration |
0.873 in |
| Relief Valve Setting |
0.872 in |
| Port Type |
0.734 in |
| Shaft Type |
0.723 in |
| Displacement Cover End (cu in/revolution) |
N/A |
| Cover End RPM [Max |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Rotation |
V2010-1F8S5S-11CC12 |
| Manufacturer Part No. |
2500 |
| Minor Diameter |
2500 |
| Mounting |
7.5 |
| Displacement Shaft End (cu in/revolution) |
1.6 |
| Major Diameter [Max |
N/A |
| Shaft End Pressure [Max |
Outlet 45° CW from Inlet |
| Major Diameter [Min |
Outlet Inline w/Inlet |
| Port Orientation - Cover End |
1/2 in SAE O-Ring |
| Shaft End Flow @ RPM |
3/4 in SAE O-Ring |
| Cover End Pressure [Max |
1 |