ALP2A/ALP2-D-6/9/10/13/16/20/22/25/30/34/40/50 High Pressure Hydraulic Gear Pump
| Weight: |
45.0 LB |
| Rotation: |
Flange Mount |
| Shaft Dia.: |
Right Hand (CW) |
| Controlled Flow Rate: |
2520VQ12A8-11CC20 |
| Port Size: |
2.5 |
| Shaft End RPM [Max: |
Flange |
| Major Diameter [Min: |
N/A |
| Minor Diameter [Min: |
Standard Pilot |
| PDF |
|
Product Details
| Weight |
45.0 LB |
| Rotation |
Flange Mount |
| Shaft Dia. |
Right Hand (CW) |
| Controlled Flow Rate |
2520VQ12A8-11CC20 |
| Port Size |
2.5 |
| Shaft End RPM [Max |
Flange |
| Major Diameter [Min |
N/A |
| Minor Diameter [Min |
Standard Pilot |
| Pilot Type |
0.875 in |
| Max. RPM [Max |
13 Tooth Splined |
| Relief Valve Setting |
2520VQ |
| Seal Material |
1.375 in |
| Port Orientation - Shaft End |
Double |
| Manufacturer Part No. |
Buna-N |
| Port Type |
2700 |
| Integral Valve Configuration |
0.715 in |
| Shaft Key |
SAE B, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| Cover End RPM [Max |
16/32 |
| Minor Diameter |
2700 |
| Displacement Cover End (cu in/revolution) |
2700 |
| Port Orientation - Cover End |
N/A |
| GPM @ 1,800 rpm, Cover End |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
0.873 in |
| Shaft Type |
0.872 in |
| Major Diameter [Max |
N/A |
| Pump Series |
N/A |
| Shaft Length |
N/A |
| GPM @ 1,800 rpm, Shaft End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
2520VQ12A8-11CC20 |
| Mounting |
3000 |
| Cover End Pressure [Max |
3000 |
| Displacement Shaft End (cu in/revolution) |
2.5 |
| Minor Diameter [Max |
18 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Spline Description |
Outlet 45° CW from Inlet |
| Shaft Seal Type |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Model No. |
1 in Flange |
| Mounting Flange |
1.7 |