PTO Pump for Tractor dump Truck Lifting Gear Pump KP75A
| Pump Series: |
118.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Major Diameter [Min: |
4535V60A25-11AA22R |
| Shaft End Pressure [Max: |
4 |
| Cover End RPM [Max: |
Flange |
| Weight: |
N/A |
| Port Orientation - Cover End: |
Standard Pilot |
| PDF |
|
Product Details
| Pump Series |
118.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Major Diameter [Min |
4535V60A25-11AA22R |
| Shaft End Pressure [Max |
4 |
| Cover End RPM [Max |
Flange |
| Weight |
N/A |
| Port Orientation - Cover End |
Standard Pilot |
| Controlled Flow Rate |
1.56 in |
| Shaft Length |
14 Tooth Splined |
| Integral Valve Configuration |
4535V |
| Shaft Key |
2.4375 in |
| Spline Description |
Buna-N |
| Minor Diameter [Min |
1800 |
| GPM @ 1,800 rpm, Cover End |
1.055 in |
| Pilot Type |
SAE C, 2 Bolt |
| Seal Material |
Single Shaft Seal |
| Shaft Dia. |
12/24 |
| Relief Valve Setting |
1800 |
| Port Orientation - Shaft End |
1800 |
| Cover End Flow @ RPM |
N/A |
| GPM @ 1,800 rpm, Shaft End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Port Type |
1.25 in |
| Mounting |
1.247 in |
| Shaft Type |
1.06 in |
| Displacement Cover End (cu in/revolution) |
1.05 in |
| Rotation |
N/A |
| Model No. |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Shaft Seal Type |
4535V60A25-11AA22R |
| Pressure Port Size, Shaft End |
2500 |
| Displacement Shaft End (cu in/revolution) |
2500 |
| Manufacturer Part No. |
37.5 |
| Port Size |
90 |
| Pressure Port Size, Cover End |
N/A |
| Minor Diameter |
Outlet Opposite Inlet |
| Shaft End RPM [Max |
Outlet Opposite Inlet |
| Mounting Flange |
1 1/4 in Code 61 |
| Shaft End Flow @ RPM |
1 1/2 in Code 61 |
| Major Diameter [Max |
4.9 |
| Max. RPM [Max |
11.8 |