Hydraulic Gear Pump 705-12-32010 Steering Pump for Bulldozer D41A-3
| Shaft Type: |
75.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Mounting: |
3520V25A5-86AA22R |
| Cover End Flow @ RPM: |
3 |
| Seal Material: |
Flange |
| Shaft End RPM [Max: |
5/16 in |
| Shaft Seal Type: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Type |
75.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Mounting |
3520V25A5-86AA22R |
| Cover End Flow @ RPM |
3 |
| Seal Material |
Flange |
| Shaft End RPM [Max |
5/16 in |
| Shaft Seal Type |
Standard Pilot |
| Shaft Key |
1.375 in |
| Pressure Port Size, Cover End |
Straight w/ Key |
| Model No. |
3520V |
| Pump Series |
3 7/8 in |
| Integral Valve Configuration |
Buna-N |
| Shaft End Flow @ RPM |
1800 |
| Minor Diameter [Min |
N/A |
| Pressure Port Size, Shaft End |
SAE C, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Port Size |
1800 |
| Port Orientation - Shaft End |
1800 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Cover End RPM [Max |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Controlled Flow Rate |
N/A |
| Shaft End Pressure [Max |
N/A |
| Major Diameter [Max |
N/A |
| Relief Valve Setting |
N/A |
| Cover End Pressure [Max |
N/A |
| Max. RPM [Max |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Shaft Length |
3520V25A5-86AA22R |
| Port Orientation - Cover End |
3000 |
| Mounting Flange |
2500 |
| Weight |
7.5 |
| Rotation |
37.5 |
| Pilot Type |
N/A |
| Port Type |
Outlet 135° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet Opposite Inlet |
| Spline Description |
3/4 in Code 61 |
| Shaft Dia. |
1 1/4 in Code 61 |
| Manufacturer Part No. |
1.1 |
| Minor Diameter |
4.9 |