6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
| Pilot Type: |
118.0 LB |
| Weight: |
Flange Mount |
| Mounting Flange: |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution): |
4535VQ60A38-11AA20-LH |
| Pressure Port Size, Shaft End: |
4 |
| Pump Series: |
Flange |
| Seal Material: |
N/A |
| Integral Valve Configuration: |
Standard Pilot |
| PDF |
|
Product Details
| Pilot Type |
118.0 LB |
| Weight |
Flange Mount |
| Mounting Flange |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution) |
4535VQ60A38-11AA20-LH |
| Pressure Port Size, Shaft End |
4 |
| Pump Series |
Flange |
| Seal Material |
N/A |
| Integral Valve Configuration |
Standard Pilot |
| Shaft End RPM [Max |
1.25 in |
| Major Diameter [Min |
14 Tooth Splined |
| Max. RPM [Max |
4535VQ |
| Port Size |
1 15/16 in |
| Port Orientation - Cover End |
Double |
| Controlled Flow Rate |
Buna-N |
| Minor Diameter [Min |
2200 |
| Model No. |
1.04 in |
| Major Diameter [Max |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Pressure Port Size, Cover End |
12/24 |
| Cover End RPM [Max |
2200 |
| Rotation |
2200 |
| Cover End Flow @ RPM |
N/A |
| Mounting |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter |
1.248 in |
| Shaft Dia. |
1.247 in |
| Shaft Key |
N/A |
| Minor Diameter [Max |
N/A |
| Shaft End Pressure [Max |
N/A |
| Cover End Pressure [Max |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
4535VQ60A38-11AA20-LH |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Displacement Shaft End (cu in/revolution) |
11.8 |
| Manufacturer Part No. |
57 |
| Shaft End Flow @ RPM |
90 |
| Port Type |
w/o Integral Valves |
| Shaft Type |
Outlet Opposite Inlet |
| Relief Valve Setting |
Outlet Opposite Inlet |
| Spline Description |
1 1/4 in Flange |
| Shaft Length |
1 1/2 in Flange |
| Shaft Seal Type |
7.4 |