High Pressure Hydstar Hydraulic Pump PV2R13 Series Double Vane Pump
| Controlled Flow Rate: |
50.0 LB |
| Weight: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Port Orientation - Shaft End: |
25 gal/min @ 1200 rpm |
| Displacement Cover End (cu in/revolution): |
35VQ25A-1D20 |
| Shaft Type: |
2 |
| Manufacturer Part No.: |
Flange |
| Shaft End Pressure [Max: |
5/16 in |
| PDF |
|
Product Details
| Controlled Flow Rate |
50.0 LB |
| Weight |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Port Orientation - Shaft End |
25 gal/min @ 1200 rpm |
| Displacement Cover End (cu in/revolution) |
35VQ25A-1D20 |
| Shaft Type |
2 |
| Manufacturer Part No. |
Flange |
| Shaft End Pressure [Max |
5/16 in |
| Cover End RPM [Max |
20 |
| Pump Series |
25 gpm @ 1200 rpm |
| Port Orientation - Cover End |
1 |
| Port Size |
1.25 in |
| Pressure Port Size, Shaft End |
Straight w/ Key |
| Shaft End Flow @ RPM |
37.5 gpm @ 1800 rpm |
| Minor Diameter [Max |
35VQ |
| Pilot Type |
2.88 in |
| Integral Valve Configuration |
Single |
| Major Diameter [Min |
None |
| Relief Valve Setting |
1 1/4 in Flange |
| Model No. |
Buna-N |
| Shaft End RPM [Max |
2500 |
| Displacement Shaft End (cu in/revolution) |
3000 psi |
| GPM @ 1,800 rpm, Shaft End |
37 1/2 |
| Major Diameter [Max |
A |
| Shaft Length |
SAE C, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Shaft Dia. |
90° CW from Inlet |
| Max. RPM [Max |
35VQ25A-1D20 |
| GPM @ 1,800 rpm, Cover End |
5 |
| Cover End Pressure [Max |
w/o Integral Valves |