07400-40400 Hydraulic Steering Tandem Gear Pump for D50A-17/D50P-18
| Port Orientation - Cover End: |
30.0 LB |
| Shaft Dia.: |
Flange Mount |
| Shaft End Flow @ RPM: |
Left Hand (CCW) |
| Integral Valve Configuration: |
V2010-1F11S4S-11CC12LH |
| Cover End RPM [Max: |
1 1/2 |
| Max. RPM [Max: |
Flange |
| Cover End Flow @ RPM: |
N/A |
| Minor Diameter: |
N/A |
| PDF |
|
Product Details
| Port Orientation - Cover End |
30.0 LB |
| Shaft Dia. |
Flange Mount |
| Shaft End Flow @ RPM |
Left Hand (CCW) |
| Integral Valve Configuration |
V2010-1F11S4S-11CC12LH |
| Cover End RPM [Max |
1 1/2 |
| Max. RPM [Max |
Flange |
| Cover End Flow @ RPM |
N/A |
| Minor Diameter |
N/A |
| Cover End Pressure [Max |
0.875 in |
| Port Type |
13 Tooth Splined |
| Seal Material |
V2010 |
| Spline Description |
1 5/16 in |
| Minor Diameter [Max |
Buna-N |
| Relief Valve Setting |
2500 |
| Shaft Length |
0.728 in |
| Major Diameter [Max |
SAE B, 2 Bolt |
| Pump Series |
Single Shaft Seal |
| Mounting Flange |
16/32 |
| Shaft Type |
3000 |
| Pressure Port Size, Cover End |
2500 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Major Diameter [Min |
4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
0.873 in |
| Weight |
0.872 in |
| Shaft Seal Type |
0.7335 in |
| Controlled Flow Rate |
0.7225 in |
| Mounting |
N/A |
| Manufacturer Part No. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
V2010-1F11S4S-11CC12LH |
| GPM @ 1,800 rpm, Cover End |
2500 |
| Shaft Key |
2500 |
| Pressure Port Size, Shaft End |
6 |
| Port Orientation - Shaft End |
16.5 |
| Port Size |
N/A |
| Shaft End RPM [Max |
Outlet 45° CW from Inlet |
| Rotation |
Outlet Inline w/Inlet |
| Minor Diameter [Min |
1/2 in SAE O-Ring |
| Model No. |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.8 |
| Pilot Type |
2.22 |