Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
| Shaft Dia.: |
76.0 LB |
| Pump Series: |
Flange Mount |
| Major Diameter [Max: |
Left Hand (CCW) |
| Shaft End Pressure [Max: |
3525VQ30A12-11AA20-LH |
| Cover End RPM [Max: |
3 |
| GPM @ 1,800 rpm, Shaft End: |
Flange |
| Displacement Cover End (cu in/revolution): |
N/A |
| Major Diameter [Min: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Dia. |
76.0 LB |
| Pump Series |
Flange Mount |
| Major Diameter [Max |
Left Hand (CCW) |
| Shaft End Pressure [Max |
3525VQ30A12-11AA20-LH |
| Cover End RPM [Max |
3 |
| GPM @ 1,800 rpm, Shaft End |
Flange |
| Displacement Cover End (cu in/revolution) |
N/A |
| Major Diameter [Min |
Standard Pilot |
| Mounting Flange |
1.25 in |
| Integral Valve Configuration |
14 Tooth Splined |
| Relief Valve Setting |
3525VQ |
| Spline Description |
1.9375 in |
| Manufacturer Part No. |
Buna-N |
| Rotation |
2500 |
| Pressure Port Size, Shaft End |
1.04 in |
| Pilot Type |
SAE C, 2 Bolt |
| Shaft Key |
Single Shaft Seal |
| Minor Diameter |
12/24 |
| Weight |
2500 |
| Minor Diameter [Min |
2500 |
| Port Size |
N/A |
| Pressure Port Size, Cover End |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Length |
1.248 in |
| Port Orientation - Shaft End |
1.247 in |
| Cover End Flow @ RPM |
N/A |
| Shaft Type |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Mounting |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Max. RPM [Max |
3525VQ30A12-11AA20-LH |
| Shaft End Flow @ RPM |
3000 |
| Shaft End RPM [Max |
3000 |
| Displacement Shaft End (cu in/revolution) |
18 |
| Port Orientation - Cover End |
45 |
| Port Type |
w/o Integral Valves |
| Minor Diameter [Max |
Outlet 135° CCW from Inlet |
| Shaft Seal Type |
Outlet Opposite Inlet |
| Seal Material |
1 in Flange |
| Model No. |
1 1/4 in Flange |
| Controlled Flow Rate |
2.45 |
| Cover End Pressure [Max |
5.96 |