Aftermarket Cat 3066 Diesel Engine Water Pump Set 178-6633
| Displacement Cover End (cu in/revolution): |
33.0 LB |
| GPM @ 1,800 rpm, Cover End: |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Shaft End Flow @ RPM: |
14 gal/min @ 1200 rpm |
| Port Type: |
1.5 |
| Integral Valve Configuration: |
Flange |
| Cover End RPM [Max: |
3/16 in |
| Port Size: |
22 |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) |
33.0 LB |
| GPM @ 1,800 rpm, Cover End |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Shaft End Flow @ RPM |
14 gal/min @ 1200 rpm |
| Port Type |
1.5 |
| Integral Valve Configuration |
Flange |
| Cover End RPM [Max |
3/16 in |
| Port Size |
22 |
| Pilot Type |
14 gpm @ 1200 rpm |
| Shaft Length |
0.875 in |
| Shaft Type |
Straight w/ Key |
| Shaft End RPM [Max |
21 / 1800 |
| Cover End Flow @ RPM |
25V |
| Port Orientation - Shaft End |
2.32 in |
| Pump Series |
Single |
| Controlled Flow Rate |
None |
| Shaft End Pressure [Max |
1 in Code 61 Flange |
| Seal Material |
Viton |
| Minor Diameter |
1800 |
| GPM @ 1,800 rpm, Shaft End |
2500 psi |
| Port Orientation - Cover End |
21 |
| Manufacturer Part No. |
SAE B, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Weight |
Opposite Inlet Port |
| Displacement Shaft End (cu in/revolution) |
2.8 |
| Pressure Port Size, Cover End |
w/o Integral Valves |