9J8660 Barrel Cylinder Block for Cat 12G/120G/130G/140G/160G Grader Main Piston Pump
| Major Diameter [Min: |
45.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Minor Diameter [Min: |
Left Hand (CCW) |
| Minor Diameter: |
2520V21A14-11DB-22L |
| Relief Valve Setting: |
2 1/2 |
| Shaft Seal Type: |
Flange |
| Seal Material: |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Min |
45.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Minor Diameter [Min |
Left Hand (CCW) |
| Minor Diameter |
2520V21A14-11DB-22L |
| Relief Valve Setting |
2 1/2 |
| Shaft Seal Type |
Flange |
| Seal Material |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Shaft End Pressure [Max |
1.09 in |
| Minor Diameter [Max |
13 Tooth Splined |
| Weight |
2520V |
| Port Type |
1.75 in |
| Integral Valve Configuration |
Buna-N |
| Mounting Flange |
1800 |
| Port Orientation - Shaft End |
0.7285 in |
| GPM @ 1,800 rpm, Shaft End |
SAE B, 2 Bolt |
| Shaft Type |
Single Shaft Seal |
| Displacement Cover End (cu in/revolution) |
16/32 |
| Pressure Port Size, Cover End |
1800 |
| Mounting |
1800 |
| Cover End Pressure [Max |
N/A |
| Pump Series |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pilot Type |
0.873 in |
| Spline Description |
0.872 in |
| Displacement Shaft End (cu in/revolution) |
0.734 in |
| Manufacturer Part No. |
0.723 in |
| Port Orientation - Cover End |
N/A |
| Shaft Length |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
2520V21A14-11DB-22L |
| Shaft Dia. |
3000 |
| Shaft End Flow @ RPM |
2500 |
| Cover End RPM [Max |
21 |
| Cover End Flow @ RPM |
31.5 |
| Major Diameter [Max |
N/A |
| Model No. |
Outlet 45° CCW from Inlet |
| Port Size |
Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End |
3/4 in Code 61 |
| Max. RPM [Max |
1 in Code 61 |
| Shaft Key |
2.8 |
| Rotation |
4.1 |