american NJ1026E SINGLE ROW CYLINDRICAL ROLLER BEARING
With over 10170 5 mm r1s (min) full-service stores, our american NJ1026E SINGLE ROW CYLINDRICAL ROLLER BEARING inventory mm b1 is extensive and our parts DCM Hydraulic Pump Equipment Co., Ltd. are 300 mm d2 priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: |
american |
| Model Number: |
NJ1026E |
| Port Orientation - Cover End: |
76.0 LB |
| Seal Material: |
Flange Mount |
| Shaft Seal Type: |
Left Hand (CCW) |
| Shaft Type: |
3525VQ30A21-11DC20-LH |
| Port Orientation - Shaft End: |
3 |
| Pump Series: |
Flange |
| Integral Valve Configuration: |
N/A |
| Minor Diameter: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
76.0 LB |
| Seal Material |
Flange Mount |
| Shaft Seal Type |
Left Hand (CCW) |
| Shaft Type |
3525VQ30A21-11DC20-LH |
| Port Orientation - Shaft End |
3 |
| Pump Series |
Flange |
| Integral Valve Configuration |
N/A |
| Minor Diameter |
Standard Pilot |
| Port Type |
1.25 in |
| Cover End RPM [Max |
14 Tooth Splined |
| Mounting |
3525VQ |
| Relief Valve Setting |
1.9375 in |
| Manufacturer Part No. |
Double |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Spline Description |
2500 |
| Pilot Type |
1.04 in |
| Shaft Key |
SAE C, 2 Bolt |
| Shaft Length |
Single Shaft Seal |
| Cover End Flow @ RPM |
12/24 |
| Rotation |
2500 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Cover End Pressure [Max |
N/A |
| Shaft Dia. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Weight |
1.248 in |
| Pressure Port Size, Shaft End |
1.247 in |
| Port Size |
N/A |
| Displacement Shaft End (cu in/revolution) |
6 |
| Minor Diameter [Max |
N/A |
| Shaft End Flow @ RPM |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Controlled Flow Rate |
3525VQ30A21-11DC20-LH |
| Pressure Port Size, Cover End |
3000 |
| Minor Diameter [Min |
3000 |
| Model No. |
31.5 |
| Shaft End Pressure [Max |
45 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Major Diameter [Min |
Outlet 45° CW from Inlet |
| Displacement Cover End (cu in/revolution) |
Outlet 90° CW from Inlet |
| Max. RPM [Max |
1 in Flange |
| Major Diameter [Max |
1 1/4 in Flange |
| Mounting Flange |
4.1 |